Neje 3 Plus A40630 Cnc Laser Cutting Engraving Machine 5.5W With Air Assist Unit

NEJE Plus A40630 Feature: -420 x 255 mmJust fit on a desktop with a width of 600mm, and the left side of the machine is not limited by the size of the material. It is suitable for processing large area materials. Under the protection of the MEMS vibration protection sensor, the engraving and cutting processes can be completed at the same time. The X-axis motion module is only 120g and is driven by a 40mm thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure, 3400 x 5600 pixels, engraving accuracy: 0.075 mm dot pitch, 339 dots/inch. The whole machine function test requires only 4 screws to complete the installation.

-Advanced laser module Through optical processing, the A40630 module has a small and large divergence angle, can directly engrave stainless steel, and the maximum cutting thickness reaches 18mm. Built-in fast intelligent drive, temperature feedback can be timely, and intelligently adjust fan heat dissipation. Safe and quiet to use. -More materials, clearer Wood, MDF, leather, paper, cotton, etc. Are all supported.

The cutting edges are very clean. Cover spraying can engrave stainless steel, glass, transparent acrylic and so on. -Portable professional control software]32-bit control system, the fastest speed can reach 200,000mm/min, supports LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS), you can change it by taking photos with your mobile phone or selecting images from the album To complete the work quickly, NEJE provides free software upgrade services. This unit comes with upgraded A40630 laserhead module with original Neje aluminum Air Assist module 4mm OD hose attachment ( please note 4mm OD hose and air pump/compressor is needed to be purchased separately ). It has factory preadjusted focus on lens under air assist unit of 10mm from engraving surface for best results.

It is not recommended to remove air assist unit because of very tight fit , do it at your own risk. Comes with 10mm focus distance set tool and all original accessories. Supports aftermarket Pro Software , such as Lightburn.