1500mw Usb Laser Engraver Logo Printer Cutter Carver Engraving Machine

Important note: l Compressed files must be decompressed before use please ensure software and folders together when nsed move or copy software files,don't separate them and move or copy software files only,otherwise,it will prompt the error,the software unwork. If software prompts error,please try on another computer,if that doesn 'I solve the problem either please contact seller 2, Please keeping the machine return to the origin position first use,and then do follow-up operation,or there may be appearing inaccurate positioning or the phenomenon of control key failure (Tips: which in the software setting options and click "reset') 3 Laser should be tocused first, after which turn the tocusing cap to minimise the spot to the smallest point,if doesn't there will be no imprinting left. 4.It machine crashes or freezes on both sides,you need to check if the tail ot motor slide rails has popped out,if so, put it back in (do not bend the lead rail) 6.Laser power and Engraving time in the software should be adjusted according to different material,you can set both of them 100 at the beginning to check if the machine is capable of engraving