2 Axis 32 Bit Grbl Control Board Integrated Driver For Laser Engraving Machine

Feature: ● This control board is a 32-bit MCU control board, which runs faster, the maximum no-load speed reaches 40000mm/min, the algorithm is optimized better, the vibration is smaller when the machine moves at high speed, and the performance is more stable; ● Using the Type-C USB interface, it is more convenient to use and the data transmission is more stable; ● One-piece integrated drive ● PWM output frequency 10kHz, higher engraving precision and clearer details ● Y-axis dual drive, stronger drive capability; ● Support USB automatic identification, when plugged in USB and connected to the computer, the offline interface is automatically shielded to avoid offline interference with data; ● 5V power output port, and software controllable, easy to expand various functions; ● Support USB flash firmware, firmware upgrade is more convenient; ● XY limit switch interface each ● Self-contained laser anti-burn mode, laser S value >=100, after the laser is turned on, if there is no movement within 5S, an alarm will occur ● Type 4540 - with a gyroscope module that can detect the movement of the machine during the engraving process, preventing someone from moving the machine Packing List : Control Board + Type-C Cable