20W Laser Engraving Machine

Originally purchased from Amazon for £299.99. I had assembled it but never used it. It has been tested and is fully working. It has sat idle in my home for about 2 years and i have finally decided to sell it. I kept all the original contents but do not have the original box so i am unable to package and post it.

COLLECTION ONLY!!! I have posted the original product description from amazon below. 20W Laser Engraving Machine, Eye Protection Laser Engraver Compatible with Various Systems Softwares Materials, DIY Laser Printer CNC Router with 410 x 400mm Engraving Area 445±5nm WaveLength ⭐⭐【Eye Protection】The design of laser protective cover plays a very good role in protecting your eyes, filtering 97% of the UV light without demanding you to wear goggles.⭐⭐【Robust and Easy-to-Install】The all-metal structure design makes the machine more robust and durable, and at the same time improves the accuracy of engraving. The whole structure is designed for quick installation, and the installation can be completed within 10-20 minutes.⭐⭐【High-Performance】Engraving can be done without adjusting the focal length; the focal spot area of the new laser is 50% smaller than other ordinary lasers.It can take into account both precision engraving and high-energy cutting. At the same time, the laser power of fixed focus laser is more stable than that of zoom laser.⭐⭐【Compatible】The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, Support Win XP / Win 7 / Win 8 / XP / Win 10, also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF, etc.⭐⭐【Precision scale line axis】X-axis and Y-axis contain precision scale line, which is convenient for you to make quick length measurement.

410x400mm large area engraving interval can meet your various engraving needs. Technical DetailsManufacturer‎WMLBKPackage Dimensions‎62.5 x 34.8 x 13.3 cm; 5.61 KilogramsBatteries Required? ‎NoItem Weight‎5.61 kgAdditional InformationASINB08V59W81RCustomer Reviews4.1 4.1 out of 5 stars 11 ratings4.1 out of 5 starsDate First Available27 Jan. 2021 Product DescriptionProduct description:Laser power: 20WLaser output power: 4.5-5WWave Length: 445 ± 5nmEngraving accuracy: 0.01mmFocusing method: fixed focus laser, no need to focusLaser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.New eye protection design:The laser protective cover perfectly protect your eyes,filter UV light for 97%.You and the people around can watch laser engraving without wearing goggles.Reduce the cost of your goggles and the inconvenience of wearing goggles. A5 LASER ENGRAVER PACKAGE:1 x X-axis assembly2×Section 57CM2×Section 48CM1 x control box3 x support legs1×Goggles1 x laser1×24V2A power adapter1 x power cord1 x USB cableStep 1~5 installation package1×M5 wrench10×rolled belt3 x small wood1×focal length film1×M3 wrench1 x marker1 x brush3×small acrylicInstallation Manual:1.

Find the four large profiles in the pictureabove, place the four profiles as shown, andpay attention to the direction of the profiles.2. Tighten the M5 screw in the shaft, andjudge whether you have installed it correctlythrough the enlarged view details.Note:a. Place the screws, but do not tighten them.b. Then tighten the screws diagonally.c. Tools required, M5 Allen key+M5 screws.Installation Manual:1.Push the X-axis component into the baseframe in the direction shown in the figure.

Adjustthe eccentric nut appropriately.2.Install the control box as shown.3. Use an M5 Allen key to install 3 Supportgasket.Installation Manual:1. Install two synchronous belts as shown in the figure.First tighten one end with a T-nut, then pass the other end through the roller on the X-axis assembly as shown in the figure, and finally tighten the other end and fix it witha T-nut.2.Push the T-nut from the groove on the end of the profile, and then use the screw to tighten the T-nut, the T-nut is as close to the end of the profile3. Cover the profile end cover (the side of the end capwith protrusions is facing down)Installation Manual:1. Fix the laser head on the slider boardwith M5*8 countersunk head screws.

Thescrews must be tightened.2. Insert the green protective covers on theleft and right sides.3. Insert the front green protective cover.4. Fix the front protective cover with M5*14flat round head screws.Installation Manual:1. As shown in the figure, fix the Y-axis limitcolumn with M3*1 4 screws on the left slide rail.2.

Adjust the eccentric nut to ensure that the X-axis and Y-axis move smoothly without shaking.TIPS:How to determine the tightness of eccentric nuts? Under the condition of ensuring that the bracket doesnot shake, you can ift one end of the machine to an angle of 45 degrees with the horizontal plane, and release the X-axis or Y-axis bracket from a highplace. If the bracket can slide at a constant speed to the end, the tightness is suitable.Installation Manual:1. Insert the three wire terminals as shown2. As shown in the figure, tie the machinefixing hole and the cable bundle with a cabletie to prevent the wire terminal fromloosening.Note:●When operating the laser engraving machine, please install the laser protective cover: if not installed ,you need to wear goggles.●Do not touch the laser, otherwise you may burn your hands.

At the same time, prevent pets grab the laser spot, please avoid strong impact on the machine.●It is forbidden for children under 14 to use this product. Children over 14 adult supervision is required.●Do not aim the laser directly at any specular reflection object, it maythe operator causes injury or burns the laser.