Acmer P1 72W Laser Engraver High Speed Laser Engraving Cutting Machine+C4 Pump

Features: 10W Laser Engraving: The P1 laser output power is increased to 10W, but still obtains 0.08mm focus as S9 through laser beam shaping technology, which means that the P1 has higher energy density, stronger cutting penetration and engraving capabilities. Faster and Cleaner: P1 advanced air-assist and high power laser can accelerate material burning and residue removing, greatly improve cutting performance, and make laser cutting faster and cleaner. Stable and Powerful: P1 engraver architecture adopts 2040 profile, which is solid and the operation is smooth; Premium track with powerful motor, more fluent to engraving and carving the item. 400x410mm large working area to meet various engraving needs. Stronger Cutting Penetration: P1 high-speed air assist and high energy density lasers both increase the cutting penetration.

Available to cut more materials, and also easier to deal with high density woods such as MDF, Walnut, those are difficult for ordinary lasers. Widely Compatibility: This machine works well with LightBurn and LaserGRBL, supports for Windows, MacOS, iOS and Android system, engraving file supports SVG, NC, BMP, JPG, PLT, PNG, etc. Offline Engraving & Safe Protection Design: Built-in ESP-32-DOWD-VS chip, 32-bit LX6 microprocessor, the machine supports operation via WIFI, TF card and USB connection. Connect and control it easily, no need messy cables. P1 equipped with emergency stop switch and anti-tilt protection device, which can stop work urgently if any abnormality is found in carving.

Specification: Model: P1 Spot size: 0.06x0.08mm Machine size: 613x590x200mm Machine weight: 5.8kg Engraving accuracy: 0.01mm Engraving speed: 10000mm/min Engraving size: 400x410mm Engraving method: USB/APP/Online/TF Laser power: 10000MW Laser wavelength: 450+5nm Supporting systems: for MAC, Windows, Lunix Machine material: aluminum profile+Iron sheet Electrical requirements: 24V 3A DC Mainboard: 32bits File format: SVG, NC, BMP, JPG, PNG AND GCODE Software support languages: English, German, Italian, French, Chinese Engraving materials: Wood, Plastic, Paper, Leather, Bamboo, Stainless, Steel, Acrylic, Glass, Etc Package Size: 66x27.5x26cm/25.9x11.2x10.2in Package Weight:7kg/15.4lb Packing List: 1 x P1 10W Engraver Kit ACMER-C4 ♦ : ACMER-C4 engraving machine accessory features an air-assist system with a 30L/min airflow, design with a knob to adjust the airflow from 0-30L/min, which providing exceptional performance for your engraving needs. ♦ Low Noise: This air-assist system operates with low noise, ensuring a quiet and comfortable working environment. ♦ Long Lifespan: With a design, this air-assist system has a long lifespan, making it a reliable and cost-effective choice for your engraving machine. ♦ Wide Compatibility: Suitable for ACMER P1 and P2 engraver. Compatible with 95% of engraving machines on the market, including TEVOUP, XTOOL, ATOMSTACK, NEJE, , SCULPFUN, Twotrees, and more.

♦ Easy to Install: This air-assist system is easy to install and use, available to connect air hose with an inner diameter of 4mm, making it a convenient and practical addition to your engraving machine. Specification: Model: ACMER-C4 Body size: 145x135x70mm Noise: ≤ 40dB Airflow: 30L/MIN Maximum atmospheric pressure: 0.03Mpa Outer diameter of the air : 4mm (air hose with an inner diameter of 4mm can be connected) Package Size: 26x26x17cm/10.2x10.2x6.6in Package Weight: 2210g/4.8lb Packing List: 1 x Air-Assisted Accessories 1 x PU Tube 1 x Control Value 1 x U Plate 1 x Nozzle Stents 4 x Scew RTOTT-C4 30L/MIN Adjustable Large Airflow - ACMER C4 air assist equipped with adjustable airflow from 0 to 30L/min, which can effectively suppress the smoke and dust generated during laser cutter to help engraver cut faster and deeper. It can increase laser efficiency to save your time. The 30L/min airflow is enough for daily cutting projects. Adjusting the airflow is also very EASY, just turn the knob to adjust the airflow.

Wide Compatibility Air Assist Pump - This laser air assist pump is designed for 99% laser engravers in the market. There is an air assist nozzle with tube (which needs the size of the laser module is 40*40mm), a direct blow nozzle, a U-clamp, a conversion tube, two allen wrenches, a M3 washers, a M3*4 Screws, two M3*10 Screws, which makes it possible to work well for 99% laser cutter. Clean Surface & Smooth Edge - ACMER air assist pump uses air to quickly reduce the temperature of the cut material surface, preventing distortion and discoloration due to high temperatures, ensuring smooth lines,complete patterns, and clean material surfaces. You will have a better artwork result with this air pump. A Protection for Your Laser Head - ACMER C4 air-assist accessories can blow away the acceptable debris and smoke generated during the laser heads work to protect the leaser heads lens from contamination, which can greatly improve the laser heads longevity and the laser engravers cutting efficiency.

All Metal Structure Design - This air pump is in all metal structure design, which has high strength, relatively stable chemical properties, excellent heat dissipation, reduces the aging of internal parts. Black spray paint on the surface, more beautiful.