Floureon 7W Mini Cnc Laser Graviermaschine Gravurmaschine Cnc Engraving Drucker

Main Features: ● 32-bit Motherboard with STM32 chip, more powerful, faster, higher precision. Easy to adjust the speed (0-3,000mm / min) and power (S0-S1,000) for both of engraving and cutting. ● Active position protection, there is a G-sensor on the motherboard for active position protection. If the machine detects unauthorized movement, the laser beam will stop. ● Laser Beam Safety Guard, if your computer system halted, led to that the laser engraver stop moving, the laser beam will stop.

● Laser GRBL is the most popular carving software worldwide, runs well in the Windows OS, could import different format images such as BMP, JPG, PNG, NC, DXF, etc. You could perform complex editing in PhotoShop, Ink scape, CAD, etc. And then connect to the laser engraver via LaserGRBL for engraving and cutting. ● This laser engraver supports PWM mode. ● Compatible with a variety of powerful laser units, such as LU7W laser unit, LU12W laser unit and LU20W laser unit.

● Pre-assembled parts, just need several minutes to set up the machine. ● It’s easy to adjust the lens focus ring to adjust the laser focus to be the smallest light spot. ● 160 x 150 mm engraving area. Specification: ● STM32 Motherboard + 32Bits Firmware. ● Frame Material: Aluminum + Acrylic ● Power Adapter Output: 12V 3A.

● Laser Module Electrical Power: 7W ( default option),15W (optional), 20W (optional). ● Laser Wavelength: 445 ± 5nm ● Available Image Format: .nc, .dxf, .bmp, .jpg, .png, etc. ● Computer System: Win XP, Win 7, Win 8, Win 10. Attention: ● Do NOT operate laser without eye protection (Laser goggles) ● Please set up this laser engraver in the fireproofing area, with good ventilation. ● Please keep minors (especially kids younger than 14 yours old) away from this laser engraver.

Minors of any age should not use this laser without direct Adult supervision and proper eye protection ● Please avoid strongly impact on the machine. ● Please do not touch the laser beam with your hands or any other objects you do not wish to engrave/burn/cut. Serious physical harm is possible if used improperly. ● Please do not touch the heat sink, when the laser engraver just stop working, it may scald your hands。 ● Please take care the laser engraver when it is working.