Halaser E1701A Modular Analogue Scanner Controller Board

Fully working board without original package. Packaging as in the photo - board and memory card, without cables.Free shipping worldwide.E1701A Baseboard is an analogue scanner card which can be extended by options described by below and provides following features: 16 bit analogue interface to scanhead with X and Y channel, ±5V and ±10V output 3x 12 bit additional analogue outputs, 0..5V output ILDA-capable interface USB 2.0 and 100 Mbit Ethernet connection Online XY grid correction with support for several correction table file formats (like BeamConstruct HD .bco correction files, SCAPS™ .ucf, Scanlab™ .ctb and .ct5, Raylase™ .gcd, GSI/CTI™ .xml, Sunny™ .txt) Switching between up to 16 grid correction tables during marking process 10 microseconds vector cycle time and resolution (microstep period) Command execution time down to 0,5 microseconds Realtime processing of laser and scanner signals 26 bit internal resolution (for better quality also with 16 bit hardware output) Can control nearly every laser type (this may require extension boards as described below) 512 MByte DDR3 RAM 1 GHz CPU clock Support for Micro-SD and Micro-SDHC cards with up to 32 GByte disk space for stand-alone operations Internal command and vector data list with more than 17 million entries Continuous list concept, no need to swap between buffers BeamConstruct PRO license included Open source compatibility library that emulates existing programming interface for fast and easy usage with existing software (contains e.g. Scanlab™ RTC4™, SCAPS™ USC™/SCI and other compatible interfaces) Very small size of about 87 mm x 55 mm Shipped with easy to use connection kit Hardware/firmware is quality made in EU/Germany