Hm Mini 2 Axis Rotary Laser Engraver Attachment For K40 And Others

HM Mini 2 Axis Laser Rotary Attachmentfor K40 and others Perfectly sized for the K40. Unlike other sellers, the only parts 3d printed are the ends and roller rims.Everything that moves or rotates, it made of aluminum or steel.Which gives you far more accuracy than any 3d printed drive gears. No additional motor drivers or power supplies are necessary.This will run off of your existing laser control board, Including your Cohesion Board. For you Cohesion board, you will need to plug it into the "A" port but will need add a $5.00 driver.For your K40, you simply need to unplug your y axis motor and plug this in.if it runs backwards, just reverse your connection. Includes:Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/1m Cable and Connector The motor mount also has slots to keep belt tensioned if it ever starts to stretch.

Using all metal parts means a more accurate rotary attachment. Aluminum Gt2 motor timing gear, Aluminum timing belt gears3d printed roller wheels with rubber o-rings and aluminum hubs.Roller wheels are adjustable and can slide back and forth on the 8mm optical rods.(2) 300mm x8mm Optical Rods Easily expandable to longer optical rods if you choose. Each of the end plates of your HM Rotary has mounting holesso you can mount this to the bottom of your laser, or to another plate. Depending on the size of your work piece, you may or may not have to cut thebottom out of your K40 to gain the proper laser head distance to your piece. No need for an assembly manual as it will arrive 95% completed.You'll just have to run the 2 rods through the bearings and slip onfour of the included aluminum 8mm rod locking collars.

And if you are running it on a K40, once you remove your stock y motor connection and turnyour machine on,you will notice this rotary will continue spinning. That's because your y motor end stop has not been activated.SO just fool it by manually moving your z towards the back of the machine to fool it into thinkingthat your stock y axis has reached it's limit. Because some laser motherboards may be different, a wiring diagram for the stepper motor will be supplied.As you may have to reverse wires to spin the motor in the correct direction. And if you are running Corel Draw with Corel Laser, follow this:54.2500 mm is the diameter of the wheels on your HM Rotary. Supply me with your 1st and 2nd color choices, If I have that color available I will ship one in that color.If not available, black will be sent.Or ask me what colors I have available ready to ship... The above Rotary Attachment is my personal rotary attachment to show what it will look like if you mount yours to a plate, (which I suggest you do.)The green bottom plate is not included with your purchase.

Each one is custom made at the time of the time of your order.SO please except it to ship within 2 - 3 business days or less.As more parts arrive to fabricate these, more will be available. So, Check Often ****You will have to search google****To do your homework on how to use one of these. Thanks for looking! Wwwholgamodscom