Monport 100W 24x40 CO2 Laser Engraver Cutter Cutting Engraving Machine Ruida Fda

New Official Monport 100W CO2 Laser Engraver Cutter, 24x40inch Workbed with Ruida Controls, Autofocus and Air Assist, LightBurn Compatible, Laser Cutting Machine for Wood Acrylic More US STOCK SPECIFICATIONS ⭐️ Dimension Working Dimension: 24” x 40” ( 60 cm x 100 cm ) Pass-through Dimension：2.9'' x 43''（7.5cm x 109.5 cm ) Machine Dimension: 61'' x 43'' x 35'' ( 155cm x 110cm x 90cm） Max Engraving Speed: 600mm/s Max Cutting Speed: 30mm/s ( actual speed depends on material ) Max Engraving Depth: 19.05mm Min Engraving Depth : 0.01 mm Focal Lens Diameter: 18mm Mirror Diameter: 25mm Package Dimension: 67.6" x 48.4" x 43.7" ( 172 x 123 x 111 cm ) 7” Standard Z-depth and 8” Max Z-depth Net Weight: 578 lbs. (260 kg) Product Weight: 604 lbs (274kg) ⭐️ Material Capability Can safely engrave or cut any laser-compatible material Wood, glass, acrylic, fabric, leather, paper, cardboard, rubber Contact us with questions on specific materials not listed. If necessary, we can test it for you ⭐️ Software Works on Windows XP, 2000, Vista, WIN 7, 8, 10 & 11, both 64 & 32 bit MacOS (Version 10.11 and higher) ONLY with LightBurn software Compatible with Lightburn, RDWorks, Coreldraw, Auto-CAD Supported image formats: BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others ⭐️ Mechanics Linear System— Enclosed aeronautical aluminum rails Motion— Equipped with stepper X, Y, Z axis, plus mechanical limit switches Cooling— Easy-to-setup water pump and hoses Air Assist— Built-in air assist with no external compressor required Ventilation— On-board exhaust fan, as well as an exhaust hose so you can vent the fumes to the outdoors Standard 110V, AC power connection 4-pin port connection for rotary axis devices Temperature-- Recommended Operating Temperature: 60-104 °F (16C-40C). Attention: the CO2 water temperature must be maintained at 60-70°F (16-21°C) 100W CO2 ENGRAVER BENEFITS 🔥【FIREPROOF VIEWING WINDOW】This viewing window is made from special fire-resistant polyester with iron frames. The melting point of this polyester ranges from 432° to 488° and the ignition temperature of it is over 1000°, which can dramatically decrease the possibility of fire accidents caused by the heat of laser burning the materials.

🔥【ENCLOSED AERONAUTICAL ALUMINUM RAIL】Equipped with X and Y stepper motors, this rail features efficient power transmission with high precision. The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units. 🔥【LASER PROTECTIVE GLASSES FOR FREE】Lasers emit radiation in the invisible form of light. This pair of laser protective glasses is certified to protect your eyes against radiation damage by looking at the class 4 laser in any way (directly, indirectly, or even looking at the laser dot on a surface can damage your eyes). 🔥【RUIDA DIGITAL CONTROLLER】Whether your chosen software is LightBurn, RDworks, AutoCAD, or CorelDRAW, this Ruida digital controller can support the given platform.

The Ruida Controller with a digital display can control the laser head, start or stop projects, adjust laser power and speed settings and so on. 🔥【HIGH SPEED AND RESOLUTION】The Engraving Speed is up to 800 mm/s; The Cutting Speed is up to 400 mm/s; The Resolution is up to 4500 dpi; 3 LED light strips above the work bed provide illumination for precision; 2.0" Focal distance provides high resolution and etching of tiny fonts 🔥【 AUTOFOCUS】Use the control panel to correct the focus automatically at the touch of a button — no more manual testing and adjustment. 🔥【 BUILT-IN AIR ASSIST】A built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise. 🔥【 3-WAYS TO CONNECT WITH PC END】Two USB ports provide options including flash drive connectivity and a USB-to-USB PC connection. In addition, one ethernet port is also available for connection.

🔥【 RED DOT GUIDANCE】The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance. 🔥【 AUTOMATIC SAFETY SENSOR】The safety shutdown sensor helps stopping the machine even if the window cover is on. Once closed, press the “Enter” button to continue operation. WARRANTY & CERTIFICATIONS (Monport official Warranty Provided) 2 year warranty on all 100W laser machines and parts 1-year warranty on laser tube FDA Approved & CE Certified Package Contents A Pair of Laser Protective Glasses *1 Laser Engraver Machine *1 Water Pump *1 Storage Tank *1 Ethernet to Ethernet Cable *1 USB Type-A to Type-A Cable *1 Venting Exhaust Duct (4 ft. max. Length) *1 Water Hoses *2 USB Drive with Software (RDworks) *1 Hex Wrenches *10 Double-sided Tape *1 Power Cord *2 Accessory Bag *1 Keys *2 Silicone Sealant *1 Instruction Manual *1 Stainless Steel Clamp *1 COMPATIBLE COMPUTER SYSTEMS ADVANCED FEATURES Spacious Work Area The wide 24” x 40”engraving table includes both honeycomb & aluminum knife beds to handle a wide variety of nonmetallic substrates, including wood, leather, fabric, stone, paper, & much more!

Ruida Control Panel The RUIDA Motherboard and intuitive RD Control System is easy to use and offers advanced capabilities. Compatible with third party software like LightBurn and AutoCAD. Enclosed Aeronautical Aluminum Rail Equipped with X and Y stepper motors, this rail features efficient power transmission with high precision. The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units. Rapid Autofocus &Red Dot Guidance Use the control panel to correct the focus automatically at the touch of a button — no more manual testing and adjustment.

The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance. Safe Observation The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. Honeycomb and Knife Beds This engraver includes 2 workbeds—one honeycomb and one aluminum blade—for handling projects large and small with maximal safety and efficiency. Powerful 100W Laser Tube 100W CO2 laser tube with an estimated lifetime of up to 8,000 operation hours depending on power setting usage and water cooling performance, allowing you to cut deeper and engrave thicker materials. Automatic Safety Sensor The safety shutdown sensor helps stopping the machine even if the window cover is on.

Once closed, press the “Enter” button to continue operation. Variety Materials Capability Engrave: Wood, acrylic, glass, fabric, leather, paper, cardboard, rubber, stone and anodized aluminum.Cut: wood, acrylic, fabric, leather, paper, cardboard, rubber. QUESTIONS & ANSWERS ❓Q1 : What materials can the 60W-150W CO2 laser engraver machine engrave? ✔️A1: Engrave: Wood, acrylic, glass, fabric, leather, paper, cardboard, rubber, stone and anodized aluminum. Cut: wood, acrylic, fabric, leather, paper, cardboard, rubber.

❓Q2: What is the Pass-through dimension of Monport CO2 laser engraver machine? ✔️A2: "Monport 60w(16’’x14’’) pass-through dimension : 730mm*40mm Monport 60w(20’’x28’’) pass-through dimension : 700mm*95mm? Monport 80w(24’’x36’’) ? Pass-through dimension :950mm*75mm Monport 100w(24’’x40’’) pass-through dimension : 1095mm*75mm Monport 130w(35’’x55’’) pass-through dimension : 1395mm*75mm Monport 150w(40’’x64’’) pass-through dimension : 1695mm*75mm" ❓Q3: What model Ruida controller does the 60w-150w have? ✔️A3: 6442G ❓Q4: Does the Gcode lightburn suit for the 60W-150W CO2 laser engraver machine?

✔️A4: The Gcode is not compatible with 60w-150w CO2 machines. But you can click here to buy the DSP version. ❓Q5: Is this CO2 laser engraving cutting machine a plug and play product out of the box, or will I need additional accessories/components? ✔️A5: Yes, it's plug and play. But you still need to check the mirror alignment after you get the machine.For beter engraving effect and the longevity of the laser tube, we recommend you consider the 5200 chiller.

Also, if you'd like to engrave tumblers, the 4-wheel rotary is need. ❓Q6: How does this CO2 laser engraving cutting machine achieve autofocus? ✔️A6: Autofocus means distance is automatically calculated and focus is automatically corrected at the touch of a button via the ruida control panel - no more manual testing and adjustments. COMPARISON OF MONPORT LARGE CO2 LASER ENGRAVER CUTTER 150W Laser Engraver Cutter 150W Laser Cutter Built-in Water Chiller 130W Laser Engraver Cutter 130W Laser Cutter Built-in Water Chiller 100W Laser Engraver 100W Laser Cutter Built-in Water Chiller 80W Laser Engraver 80W Laser Engraver Built-in Water Chiller Rated Laser Power 150W 150W 130W 130W 100W 100W 80W 80W Engraving Area 40×63 in. 40×63 in.

35×55 in. 35×55 in. 24×40 in. 24×40 in. 24x36 in.

24x36 in. Compatible Operating Systems WindowsMacOS WindowsMacOS WindowsMacOS WindowsMacOS WindowsMacOS WindowsMacOS WindowsMacOS WindowsMacOS Autofocus ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Pass-through Dimension 2.9x 66.7 in. 2.9x 66.7 in. 2.9x 54.9 in. 2.9x 54.9 in.

2.9x 43 in. 2.9x 43 in. 2.9x 37.4 in. 2.9x 37.4 in. Water Chiller ✗ ✓ ✗ ✓ ✗ ✓ ✗ ✓ Machine Dimensions 84.6x 59x 35 in.

84.6x 59x 35 in. 72.8 x 55 x 35 in. 72.8 x 55 x 35 in. 61x 43x 35 in. 61x 43x 35 in.

57x 43x 35 in. 57x 43x 35 in.