Opus 1390 130W CO2 Laser Cutter Engraving Cutting Machine 1300 X 900 Ruida 240V

X Opus Oculus 1390 Laser cutter and engraving machine Purchased in 2021 for my woodworking hobby (vanity project!!!!), however due to my full time occupation taking up virtually all of my time I am reluctantly selling it to make room in the unit! Unit has had no more than about 50 hours of use, and has been cleaned and aligned regularly. As you can see from the pictures it is pretty much in an as new condition... Machine runs off a single 240v plug, the pump, extractor and chiller units are connected to the main unit so do not require any additional mains connections. A very easy unit to operate in that respect! Bed dimensions are 1300mm by 900mm so can take larger sheet material.

Laser is a 130 Watt RECI tube so very capable of cutting 18mm MDF, 10mm Acrylic etc Controller is a RuiDa, so very accurate and easy to use. Compatible with software such as Lightburn, RDworks, CorelDraw etc Accuracy : ±0.01mm Cutting Speed : Up to 36000mm/min Engraving Speed - Up to 60,000min/min Table - Blade and Honeycomb (both included) Table Depth : Up to 400mm which is motorized on the Z axis X Y Axis - Square Guide Rails Chiller Unit is the upgraded CW-5000 Files can be uploaded by either PC/Laptop to USB cable (which is how we used it) USB Stick or Ethernet Cable via network Included in the sale is around £800 worth of 3mm and 5mm Acrylic in various colours and also some MDF 6ft sheets of 2mm 4mm 6mm if you want them, as I will have no use once the machine is sold. OPUS in County Durham can service/provide spare parts if and when needed, however there really isn't much to do apart from keep it clean and realign the laser every so often. As a side note, you will probably need to realign the laser mirrors after collection, only because they may move during transit..this takes about an hour and OPUS has videos and instructions of how to do this....pretty easy to do. Collection required and due to size and weight I would recommend a Luton with a tail lift.

This really is a very nice piece of machinery and will be sorry to see it go, however it's just not getting the use I thought it would so better to sell to someone who will make use of it. Any questions please message. Machine can be seen running Payment by Bank Transfer, offers will be considered.