Ortur Aufero Laser 2 Laser Engraving Machine 10,000mm/min 24V/2A ,LU2-2/LU2-4-SF

Available Materials Enjoy The Fun Of DIY *Available but not limited to the above materials, you can also carve on food and so on. Perfectly Compatible With Software LaserGRBL (Free)—Basic and easy-to-use Compatible with Windows from XP to W10 / Linux. Supports JPG / PNG / BMP / DXF / NC, etc. LightBurn (Paid)—Advanced and highly customizable Compatible with Windows from XP to W10 / Linux / Mac OS. Supports JPG / PNG / BMP / DXF / NC, etc.

10,000mm/min Engraving Speed Framework with low center of gravity design · The aluminum alloy frame with a low center of gravity design is more stable than competitors and supports faster running speed. V1.8 Firmware · Using the latest Ortur Laser 1.8 series firmware, the engraving quality can be guaranteed even at a running speed of 10,000mm/min. 9th Generation ESP32 Motherboard · Higher MCU frequency and faster calculation speed. Comparison of Three Laser Modules LU2-2 Fixed Focus Luminous Power: 1,000-1,600mw More suitable for beginners. LU2-4-SF Short Focus Luminous Power: 4,500-5,000mw Compared with LF, it has a smaller spot and is more suitable for engraving.

LU2-4-LF Long Focus (With Air Assist) Luminous Power: 4,500-5,000mw Compared with SF, it has a longer depth of field and is more suitable for cutting. Air Assist Air Flow Regulator Pipe Connector Disclaimer:Ortur is advertising real Optical Power output in all the 2nd Generation Module Labels. There are in the market many products with impossible claims of power output. These are simply impossible with current diode technology. We give our users and customers the real specifications, in order to allow an informed purchase decision.

Ortur Laser modules dot size are measured by engraving on real-world products and materials. The Laboratory results can be significantly better, but are of no consequence for the users. As a rule of thumb: More power is not always better. Engraving results benefit from a finer/smaller dot size and less power. Cutting on the other hand requires the opposite: More power, which consequently forces the dot size to be bigger.

Enhanced Engraving Accuracy Four Safety Protections Active Position Protection Active Position Protection via G-shock sensor. Active Connection Control Stop engraving if PC is disconnected or crash. Exposure Limitation Exposure Limitation that turn off laser if there is no movement for a long time. (prevent burning holes in your table or start a “garage fire”) Power Safety Control System Power Safety Control System that cut off the power supply to the laser module if the power input is abnormal. (not within the range of 21-27V).

Fuse Overcurrent Protection Function The laser module will be cut off after shutdown, and the power supply will be cut off if the power input is abnormal (not within the range of 21-27V). A Variety of Add-ons To Meet Your Different Needs Optional YRR2.0 Y-axis Rotary Roller It's optional, you could buy it separately, and use this auxiliary device to work with Aufero Laser 1 for engraving cylindrical objects. Optional OOC2.0 Offline Controller It is optional, you can buy it separately, and use this auxiliary device to control the engraving machine without connecting to a computer. Optional ZLD Z-axis Lifting Device It is optional, you can buy it separately, and use this auxiliary device to adjust the height of the laser head more conveniently. OE2.0（Coming Soon） Laser Saftey Enclosure It is optional, you can buy it separately, and use this auxiliary device to cover the machine for dust exhaust.

390×390MM Engraving Area Product Name Laser Engraver Product Model Aufero Laser 2 Engraving Area X390*Y390MM Net Weight 3.0KGS Gross Weight 4.16KGS Product Size 582*580*140MM Box Size 630*290*110MM Product Material Aluminum Profile + Sheet Metal File Format JPG / JPEG / PNG/BMP / SVG, etc Control Software LaserGRBL ( Free ), it could only support Windows OS. LightBurn ( Not free), it could support Windows, MAC and Linux. Rated Power The rated power ofthe laser module + 15W Package List Laser Module List Q&A: # How long does it take to assemble? 5-10 minutes (Depends on your preparation). # Which engraving software is supported?

LaserGrbl (Free)(Windows XP, Windows 7, Windows 8, Windows 10)LightBurn (Paid-30 Day Free Trial)(Mac OS, Linux, Windows XP, Windows 7, Windows 8, Windows 10) # What materials can be engraved? Wood, plastic (opaque), cloth, leather, and other materials that can be burned by laser. # Can I engrave metal and stainless steel? You can mark the metal after plating or spraying (acting on the coating or oxide layer), stainless steel (the effect is better after the stainless steel is painted black. Note: It is not engraving, but discoloration).

# What is the maximum cutting thickness of the board? With LU2-4 laser module, it can cut 4mm plywood (wood plywood) or 6mm pine board with one cut. # What is the largest engraving size for Laser Master 2 Pro? 390mm×390mm (Approx. 15.75inch×15.75inch). # How many hours can Aufero 2 work continuously?

24 hours (In a well-ventilated environment). # Can the laser module be replaced? Yes, but the Laser Module input voltage needs to support 24V. # How long is the warranty period? One year warranty (We will send you the corresponding non-artificially damaged parts for free).

# Is it possible to engrave cylindrical surfaces? Need to purchase Aufero/Ortur YRR2.0 series Rotary Roller as an accessory to sculpt the cylindrical surface. # How to set the correct focal length? All Ortur laser modules have a fixed focal length (the distance from the laser module to the surface of the object is fixed).