Ortur Laser Master 2, Laser Engraving Cutting Machine

✅[Advanced firmware] Ortur laser master firmware, smarter, faster, more accurate and easier to use. Professional motherboard with 32-bit MCU. It can preprocess 32 instructions, support up to 921600 baud rate, more powerful! The engraving speed can be as high as 3000 mm/min. (If the laser engraving result is not considered, the moving speed can be as high as 1000MM/S)✅[Excellent safety protection] 1.

There is a G sensor on the main board, if the machine detects unauthorized movement, the laser beam will stop. 2. If your computer system stops or the USB cable is disconnected, causing the laser engraver to stop moving, the laser beam will stop to prevent fire. 3. If the laser engraving machine is under control, but the user forgets to operate and keep the laser beam working, if the motor stops moving, it will cut off additional safety to prevent fire.✅[Perfect compatible system] Use LaserGRBL or LightBurn (this is the most popular paid engraving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS and Linux.✅[Achieving precise engraving] The laser power range can be S0-S1000. Compared with only S0-S255, Ortur Laser Master can control the laser beam more accurately, and can even "draw" a photo on paper with a high-power laser unit.

The 8-bit high-power laser engraving machine cannot do it.