Reci W2 100W CO2 Laser Cutting Machine Engraver Cutter CW5200 Chiller Ruida Dsp

RECI W2 100W CO2 Laser Cutting Machine Engraver Cutter CW5200 Chiller RUIDA DSP1. Please double check shipping address before placing order. If buyer put wrong address, buyer will take liability of send/return shipping cost. Please note. Thanks. 2.

For the EU buyers, we will ship to your address from EU warehouse via Dachser, the shipping time is about 5-10 business days. 3. For US buyers, the item will be shipped from US warehouse, the shipping time is about 30-45 working days. This product is very heavy and it requires special delivery truck, so we will need your correct phone number and address in order to schedule the service. * Addresses CAN NOT be changed once the product has been shipped. The delivery service does not include a lift-gate, residential service, installation, or delivery inside your house.

For residential address deliveries and lift-gate service, please kindly find these link:Residential address: www.classifieds board.com/itm/phone9Lift gate service: www.classifieds board.com/itm/phone9 HL CO2 Laser engraving cutting machines are widely used in the following materials, can set up different parameters per different materials to do laser cut or laser engrave. Our machines can do the work mentioned below, but not limited to. Please contact with us to check more materials’ application.Acrylic laser cutting and engravingMDF laser cutting and engravingFabric laser cutting and engravingPolywood laser cutting and engravingLaser engraving leatherLaser engraving photos on woodLaser engraving stoneLaser engraving on glassLaser engraving on plastic parts Control SystemRDC6445 controllerEffective Working Area23.6" x 37.8" (600*960 mm)Laser PowerRate: 90W, Peak: 100WLaser Tube BrandRECI CO2 W2Engraving Speed0-500mm/s (Suggest speed 200mm/s below for quality)Cutting Speed0-50mm/s (different material speed differs)Recommend Cutting Speed0-20mm/sCutting Depth0-10mm(different material differs)Power Supply110V/220VOperating Temperature0 - 45°COperating Humidity5 - 95%Min. Shaping CharacterEnglish 2.0 x 2.0mmLinear GuidesX-axisAuto-focusYesDriving systemZ axis 57 stepper motorChillerCW-5200Equipment Dimensions145x94x58cmPlatformHoneycomb platformLifting platform0-200mmWork SoftwareRDworks V8Warranty1 Year (We provide technical support and free spare parts all covered by warranty) New launch HL-1060 DSP 100W laser RDworks off-line with high-speed High configuration board.The use of high-tech control system, imported lens and reflector system. Use USB 2.0 off-line .It supports CAD and RDworks and CorelRAW software ,variety of software typesetting engraving and cutting.

With lifting platform.Using professional high quality laser power supply and CO2 laser tube. 1. It supports RDworks and CoreldRAW and CAD software to engrave and cut.2. Can do color separation work of engraving and cutting at the same time. 3. The different colors can be set for different engraving and cutting speeds. 4. It can support file format like AI, DXF, PLT, DST, DSB, EPS, BMP, RDB, GIF, JPG, PNG, MNG, ICO, CUR, TIF, TGA, PCX, WBMP, WMF, EMF, JBG, PGX, RAS, PRUM, SKA, RAW DSP 100W 1060 CO2 Laser x 1 Honeycomb table x 1 CW-5200 chiller x 1 Air pump x 1 Exhaust pipe x 1 Wheels x 4 USB cable x 1 Spare key/limit switch/open cover protection switch/multimeter/electric iron 1.

Are your machine certified? Answer: The HL laser machine is CE&FDA certified 2. How long is the shipping time? Answer: For most of address, the Product Delivered in 7 to 10 Days Since Payment Cleared. 3. Is the machine ready to use?

Answer: We calibrated the machine well before shipment. But the machine need to setup when you take out from the package. We have technician to support the setup. 4. Can the machine engraving and cutting in a job? Answer: Yes, even on the same Job, you can do setting with different colour in the software.and it can work on same time. 5.

Can the machine be split so it can fit into my doors? Answer: No. This machine is cabinet model. It can't split to fit. 6. Is the machine must work with computer?

Answer: It only needs to connect with computer with USB cable when you change the settings of machine. There are 3 ways to communicate with laser, computer, USB stick and Ethernet. 7. How long the laser tube is working well? Answer: It depends how much power percentage that use the laser often. 8. Do you sell spare parts?

Answer: Yes, we sell spare parts as well, such as lens, belt etc. If you need spare parts in the future, you can buy from us. 9. How about the after-sales service? Answer: We provide remote after-sales service by email, video, phone and team viewer. We will reply within 24 hours. 10.

I have no experience. Is it easy to use? Answer: Yes, HL laser focus on co2 laser machine for more than 10 years. We have complete technical support and tons of videos to help you setup laser machine. Also, we send you the cutting parameter for most materials. 11.

How long is the laser tube life? Answer: It depends how much power percentage that use the laser often. Keep laser power under 60% for long term use, it is about 7000 hours. 12. Anything else do I need for HL CO2 laser machine? Answer: Computer and software( RUIDA RD Works ,graphics software program, eg.

Coreldraw, AI.) 13. Are HL CO2 laser machines safe to operate? Answer: Sure, the HL CO2 laser machine is safe to operate through correct operation.It is with safety protection device. 14.What types of graphics can I engrave and cut with HL CO2 laser machine? Answer: Such as BMP,JPEG,PLT,CDR,PCX,DIB,TIF,DXF...... 15.

What kind of materials can HL CO2 laser machine cut or engrave? Answer: The HL CO2 laser machine is suited for many types of materials such as wood, acrylic, leather, plastics, fabrics, etc. 16. What are computer operating system requirements for running HL CO2 laser machine? Answer: Windows 7/8/10 17. Can HL CO2 laser machine engrave and cut on metal?

Answer: It can not cut metal. However,metals which have been coated with cermark or painted can be engraved . For exampleanodized aluminum, painted brass, or any other treated metal. PRODUCT CONDITIONThe item is New. Original manufacturer's warranty, if any, still applies, with warranty details included in the listing comments.

Original packaging is present for most New items but certain items may be re-boxed. The item may show some limited signs of wear with small scratches or cosmetic blemishes.WARRANTYTHE COMPANYwarrants your product for a period of 1 year from the original date of purchase. If you discover a defect in a product covered by this warranty we will send replacement parts, replaced by user.EXCLUSIONSThis warranty covers defects in manufacturing discovered while using the product as recommended by the manufacturer. The warranty does not cover loss or theft, nor does coverage extend to damage caused by misuse, abuse, unauthorized modification, improper storage conditions, lightning, or natural disasters. The warranty does not cover parts that are subject to normal wear and tear replacement requirements, such as wear items.LIMITS OF LIABILITYShould the product(s) fail, your sole recourse shall be repair or replacement, as described in the preceding paragraphs.

We will not be held liable to you or any other party for any damages that result from the failure of this product. Damages excluded include, but are not limited to, the following: lost profits, lost savings, lost data, damage to other equipment, and incidental or consequential damages arising from the use, or inability to use this product. In no event will THE COMPANY be liable for more than the amount of your purchase price, not to exceed the current list price of the product, and excluding tax, shipping and handling charges.THE COMPANY disclaims any other warranties, express or implied. By installing or using the product, the user accepts all terms described herein.