Laser Machine Rotary Attachment Laser Machine Rotary Attachment The maximum length of processing:11.7"(30cm). The maximum diameter of processing: 7.8"(20cm) . Step motor: three wires(36V) Transmission mode: by belts Transmission proportion: 1：3 Weight: 28.66lb(13kg) Size: 20.08*6.24* 7.41(520*160*190mm) The weight of holding: ＜44.09lb(＜20kg ) #1: It is the 3 claws of the rotary. It can be used for fixing the engraving objects, used alone, can also be used in conjunction with the#2. #2: To fix carved objects with #1.
To adjust the distance between 1# and 9# by the slide bar. And the specific distance/length be determined by the length of the sculpture objects. #3: To adjust the distance between the 3 claws of the rotary and 1#. And the specific distance/length be determined by the diameter of the sculpture objects. #4: Connect the laser machine position #6.Pay attention to mounting screws in the installation position.
#5 : After Engraving objects placed between #1#2, it can be used for fixing objects and preventing the #2 sliding and the resulting carved objects slide off. #7: The anti claw of the rotary. It can be used for fixing the hollow carved objects. #8 : The wrench. To adjust the distance of the 3 claws of the rotary.
The installation and application of the axis of rotary:The carving glass as an example to introduce the usage of the rotary simply. First: to install the rotary.first to put down the platform, down to the level can put on the axis of rotary. And to make sure it can not be touched with the laser head.Put the axis of rotary on the laser platform. ★The position of the axis should be horizontal with the x axis. Then put the glass bottle in the axis.
★To adjust the Y axis to make the laser head be vertical with the top of the platform.#6 This should be attached with the rotary. ★You should unsnatch the screws first when you install. ★Keep the wires away from the laser head and the rotary in order to prevent the confusion wires.•To prepare 3-4 pieces of thin paper. The size approximately is 3.12"(80mm*80mm) •Keep one piece of paper wet, and paste on the bottle. Others is reserved for other usages.
•Adjust the laser head to the top left of the paper. The installation of the software： The function of this axis is to replace the Y axis. So after you install the software, the Plug-in unit，RDCAMSetup6.0.24，you have installed before can drive. As the different motor has different step, you should adjust the Parameters of the rotary. As following： 1.
Open the Coreldraw Draw a square: 3.45*3.45" (50MM*50MM). See the left picture, open the plug-in unit. 2. The interface may be show in English or Chinese, you can change by yourself. See the left picture. 3. In the "config" to select the "vendor param".
See the picture. And the password is RD8888 4. In the "vendor param" to choose the "Axis", then choose the "Y"( as this axis is to replace the Y axis.) Then to choose the "Read" in the right side, to read the data of Y axis. (You should keep the laser machine connected to the computer, and be in active state ) See the following picture. 5. (The left picture shows the data of the Y axis.
You should make sure the data is not the X axis. Be careful!) In the "Step length (um)", you will see a data. And you should write down this data, it is very important to recover the Y axis. You should write down in your textbook to make sure you can find it at any time. 6. After save the data of the "Step length (um)", then we can adjust the data of the rotary.
First, to select the square (50mm*50mm,the square we have select in Coreldraw before) Then, choose the "write" in the right. And then, choose the "cancel" to quit. 7. •Change the cutting power of the laser to 12.(This cutting power is just to cut one piece of paper, and specific conditions you can reference the laser machine.) •Begin to cut •To measure the size of this square, is it the right size(50mm*50mm)： 50mm* Amm If the data of the "A" is less than 50mm, then go back to step sixth, then enlarge the data"50" If the data of the "A" is more than 50mm, then go back to step sixth, then deflate the data"50" •By this way, we can adjust the paper we have cut to the right size(50mm*50mm). When you adjust well, you can save the data to use later without any adjustment. Item#DescriptionQTY130030Rotary Attachment1 Shipping & Handling Details Default Shipping Cost or Free Shipping Information: ▲ Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground.
Customers from other areas or needs other shipping ways, please contact us. ▲ Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information. ▲ Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer. Handling Time: Shipping is usually made in 1-3 business days after payments cleared.
Orders are processed from Monday-Friday; Not on the weekends & public holidays. Sales tax / Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method.
Local Pick Up & Service Center Return / Refund If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding. Returns & Exchanges ▲ All returns must be made within 30 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment.
A partial refund may be applied for opened or damaged items, depending on the condition. ▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged. ▲ Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges ▲ All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products ▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding. ▲ Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method. ▲ If an item is received damaged, customer service must be contacted within 7 days of receiving your item.
All returns require a RA (Return Authorization) number as above. Payment PayPal: PayPal preferred only with a confirmed address. We want you to feel secure in your purchase. Keep everything within PayPal and classifieds board protects both buyer and seller. ECheck Issues: Payments via eCheck do not clear immediately.
Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you. Warranty & Feedback ▲ 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. ▲ Any warranty shipping cost to us is responsible by buyer.
▲ Any shipping cost to buyer is responsible by the seller. ▲ We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP.Thanks very much. On 20-Jan-17 at 00:29:21 EST, seller added the following information:
Add new question to the seller