Sculpfun CAM500 Lightburn Camera For Laser Engraving Machine, 500 W Pixel Camera

SCULPFUN CAM500 Lightburn Camera for Laser Engraving Machine, 500 W Pixel Camera THE OFFICIAL SCULPFUN CAMERA The camera mount and camera range are perfectly matched to the SCULPFUN laser engraving machines, including the S6, S9, S10 and S30/S30 Ultra series. The installation is very firm and the camera is clear. Precise positioning of the material: perfectly adapted to the CAM function of Lightburn software, through the camera to identify the position of the carved object, the positioning error is less than 1 mm; *Tip: the height of the camera from the carving position is recommended: 325 mm, after the camera is aligned, when carving objects as close as possible to the centre of the camera, 400 x 400 mm area, the how It moves away from the centre point Engraving Position Control: With the Sculpfun CAM500 camera, it is possible to move the pattern in Lightburn to a position on the screen where the engraved object is located, and the laser will engrave the pattern at that position once the setting is complete. Image Tracking The Sculpfun CAM500 camera with Lightburn can be used to detect and extract patterns on the surface of objects (e.g. T-shirt patterns, hand-painted patterns of children, etc.) and create engraving files with one click.

This is very convenient to quickly get vector files. STACK ENGRAVING With the laser lightburn camera, multiple engraving objects can be added to complete various independent tasks at once, and the laser will automatically find the preset engraving positions one by one and start working, which increases efficiency. [ ENGRAVING IMAGE RECORDING ] Record the entire process of completing your work with the Sculpfun CAM500 camera so you can show them to your friends and share them with them. Industrial-grade camera: Specially designed for Lightburn industrial camera with real 500W pixels for more accurate and clear identification; extra large detection range: 120° wide angle lens for a working range of 400 x 400 mm; A wide range of mount configurations: the Sculpfun CAM500 camera mount is available in 2 mounting configurations, one is a T-shaped mounting bracket for all Sculpfun models and almost all V-groove structure engravers; the other is a U-shaped mounting bracket for U-beam machines such as the xTool; (All models available from SCULPFUN including the S6, S6 series, S6, S). 6 pro, S9, S10, S30/S30 Ultra, Note: not available with additional purchased extensions.

Other models specially suitable, D1PRO, falcon2, LM2 PRO S2, 20PRO 20S, 55, JL3, 3 MAX V2.)