Sculpfun CAM500 Lightburn Camera For Laser Engraving Machine, 5MP Pixel

I bought this for use with my xTool D1 Pro but I cannot get it to fit inside the enclosure and therefore it is no good to me. In Lightburn I set the entire thing up and it works perfectly. So essentially you are buying a brand new unit for use with any other laser engraver/cutter of a similar size to an xTool D1. Sculpfun official camera: Perfect for all models of SCULPFUN laser engraving machines, including S6, S9, S10, S30/S30 Ultra series. It cannot be used with Area Expansion kit.Industrial Camera for Laser Engraver: The camera is specially designed for laser engraving machines.

With a true high-definition 5MP, the camera can capture clearer images and identify more accurate positioning.Precise Positioning: The camera is perfectly fit with the CAM function of the Lightburn software, which can identify the position of engraving objects, with a positioning deviation of less than 1mm.Engraving Position Controlling: You can move the pattern onto a certain position of the material through the lightburn software interface, the laser machine will engrave the pattern at that position.Image Tracing: It can identify and extract the patterns from the surface of objects and form engraving vector files .Batch Engraving: You can add multiple engraving objects and complete the different independent tasks at one time.HD Video Recording: This Sculpfun laser engraving camera has a 120° wide-angle lens with a working area of 400*400mm.High Adaptability: T-shaped fixation clamp is suitable for SCULPFUN machine models and almost all engraving machines with V-slot structure.(Please note that the additional purchased area expansion kit is not applicable.)U-shaped fixation clamp is suitable for U-shaped beam machines. Other applicable models: D1PRO, falcon2, LM2 PRO S2, 20PRO 20S, 55, JL3, 3 MAX V2.*Notice: The recommended height from the camera to the engraving position is 325mm. With the camera well aligned, please make the objects as close to the center of the camera as possible, within the 400*400mm working area. The precision will be decreased as the engraving objects are moved away from the camera center.