Sculpfun Lasermodul Laserkopf Für Lasergravurmaschine Gravurmaschine J7N5

Features: Widely Compatible Design: The SCULPFUN module has a clever and widely compatible structural connection device, which can be well adapted to different engraving machines, cutting machines, 3D printers, milling machines, etc. It can be installed on a variety of brand machines, such as SCULPFUN, ATOMSTACK, engraving machine, or other DIY type machines. Beam: S9 uses the latest 5.5W beam shaping technology ,the effect of this technique is to get a -high-density energy beam, it is more than just a , the entire beam is very thin. It has an ultra-fine 0.06mm , with cutting penetration and , he can cut to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel, this is almost beyond the effect of 90W CO2 . Fixed- Design: The S9 module has the fastest focusing design on the market.

It combines a fixed lens and a sliding design. You only need to slide the and tighten the screws to complete focusing. This makes the use of the very simple. Using it on different machines does not affect its sliding fixed focusing function. Eye- Design: The filter cover filters 98% of the ultraviolet to the eyes.

You and the people around you can watch engraving from all angles without wearing . At the same , it can animals from catching the . General /PWM Modulation Board: It uses a common /PWM modulation board, which can be adapted to common GRBL or motherboards. You can view product pictures for details. Specifications: Model: SCULPFUN S9 Module Applicable Machines: engraving machines such as SCULPFUN, ATOMSTACK, , ELEKSMAKER, or DIY 3D printers, machine tools.

Engraving Materials: Paper, cardboard, , white, board, alumina, stainless steel, black metal, ceramic Cutting Material: Thin board, acrylic board, cardboard, non-woven fabric, bamboo, some board; Output : 5.5-6W ( energy) Length 455±5nm Type and Fixed Method: fixed , fixed through 20mm measuring column Protective Cover: The -shaped violet filter cover protects the user's eyes and prevents animals, etc. From contacting the . Material: alloy Packing Size: 11*12*18cm Package Weight: 0.5kg Note: the head can be used for engraving machines that meet the following conditions 1. The for the module is 2. Control signal is TTL/PWM signal, 3.3/5V high level, frequency 0.2-10khz. 3.

The wiring terminal is XH2.54 3pin. Circuit Board Parameters: Circuit Board Size: 40*40mm Circuit Board:/PWM modulation board Input voltage: Input of module: 3A Wire Rod:HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC ). Fan: 0.15A 4020 fan Fan : 10000 rpm Operating : -20 ℃ to 70 ℃ Precautions: ●For detailed machine instructions, please refer to the manual for parameter settings. ●Before installing and using the , you should understand the adaptability and the maximum input voltage and current to damage to the . ●Do not the with your hands, otherwise you may burn your hands.

●Please strong impact on the machine. ●It is forbidden for children under 14 years old to use this product. Over 14 years old need supervision. ●Do not apply the directly to any specular reflection object, which may cause injury to the operator or burn the . Package List: OS5959 head*1 Multi-function Structural Connection Device *1 20mm Measuring Column*1 Screws Tool Kit*1