Sculpfun S10 10W Laser Engraver Engraving Cutting Machine+Air Assist Nozzle Tube

Features: 1. Powerful high-speed air assist: The S10 is equipped with high-speed air assist nozzles. What makes this nozzle different is that it has an advanced hydrodynamic design that makes better use of air pressure. When using the same compressor, the S10 has a faster jet of air. For example, when using a 30L/min, 0.03Mpa air compressor, the S10 nozzle will eject a high-speed airflow of up to 14.5m/s.

This will greatly improve cutting penetration and cutting efficiency. 2. Ultra-fine and high-density 10W laser shaping technology: The laser power of S10 is increased to 10W, which is twice that of S9. But get the same 0.08mm focus ultra-fine laser beam as S9, which means S10 has higher energy density, stronger cutting penetration and engraving ability. 3. Faster, stronger and cleaner: Combining advanced high-speed air assist and 10W high-energy density laser, the S10 reflects industrial-grade wood cutting performance: First, the cutting efficiency is greatly improved, and the cutting is faster; Second, the cutting penetration is stronger, and many high-density woods can be cut; Third, the cutting surface is cleaner, and the strong airflow blows away the residue, so that there is no stain on the surface of the cutting object. 4. Industrial grade cutting accuracy: S10 adopts extremely strong high-precision linear slide rail X-axis, making it reach industrial grade engraving accuracy.

When comparing small engraving details, the S10 does not have the wavy pattern that ordinary engraving machines appear. 5. More advanced and upgradeable 32-bit motherboard: S10 motherboard adopts 32-bit chip, which has faster operation speed, and also retains Z-axis and limit switch functions, which is convenient for people to upgrade the engraving machine. It still perfectly supports laser cutting software like Lightburn and LaserGRBL. 6. Expandable engraving area: S10 follows the Y-axis expandable design of S9, the original engraving area is about 400x400mm, but you can buy S10 Y-axis expansion kit to expand the engraving area to 400X950mm, which can help you get 230% of the engraving area at a very low price. This can help you better handle large-area engraving or cutting jobs. 7.

Detachable laser eye shield: The S10 is equipped with a detachable eye shield, which will not dazzle even without glasses. Also if you don't need it, you can easily disassemble it. 8. Safe design: There is a very safe and eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency. The all-metal body makes the machine very sturdy and durable. 9. A4 steel pad: The provided A4 size steel pad can well protect the table from laser damage.

Isolate fire hazards. 10. Right-angle measuring ruler: There are precise scale lines on the X-axis and Y-axis to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraved object. The 410x400mm large-area engraving range can meet your various engraving needs. Specifications: Power Input: 100-240V AC, 50/60Hz Output: 12V 5A Diode laser output power: 10W (note that this is light energy not electrical energy) Inner diameter of auxiliary air hose: 7.5mm/0.29" (30L/min, 0.03Mpa air compressor is recommended, and the outer diameter of air outlet interface is recommended to be 8mm/0.31") Laser wavelength: 455��5nm Engraving accuracy: 0.01mm Engraving area size: 410*400mm/16.14*15.75" Focusing method: Fixed focus column + sliding device Laser protection cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles.

Machine power consumption: about 36W (not related to engraving or cutting performance, just power consumption) Engraving/cutting materials: Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, bamboo, cardboard, plastic, leather, PCB board, alumina, 304 stainless steel, ceramic, dark stone Cutting material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo, leather, some plastic boards, PCB boards Operating software: LaserGRBL, LightBurn, LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support for Windows system, support for MAC system. Supported file formats: NC, BMP, JPG, PNG, DXF and other image formats. Data transfer method: USB connection Equipment net weight: 3.42kg Packing weight: 5.13kg Packing size: 600*345*130mm/23.62*13.58*5.12" Product size: 560*510*265mm/22.05*20.08*10.43" Precautions: 1. Because of the powerful laser power of S10, it is forbidden to run the engraving machine without supervision. Pause it if you're not around. 2.

For detailed machine instructions, please refer to the manual for parameter settings. 3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles. 4. Do not touch the laser with your hands, otherwise you may burn your hands. 5. Please avoid strong impact on the machine. 6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision. 7.

Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser. Notes: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-3mm measuring deviation due to manual measurement. Packing List: 1 x X-axis assembly 2 x X profiles 2 x Y profiles 1 x Control box assembly 3 x Support feet 1 x S10 laser 1 x 12V 5A power adapter 1 x Power cord 1 x USB cable 1 x Air tube 3 x Tool kit 1 x Laser goggles 1 x Test wood board bag 1 x A4 Metal backing plate Step 1-6 Installation package 1 x Manual