Sculpfun S30 Diy Laser Engraver 5W Engraving Cutter Machine With Assist Kit Uk

Smoked into a fuzzy fog. The S30 series is equipped with an airassist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and is very suitable for the manufacture of exquisite gifts. Replaceable protective lens: S30 series laser adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power. A free lens is included with the purchase, more lens can be easily purchased from SCULPFUN.

Expandable engraving area on both XY axes: The S30 series adopts an innovative XY axis expandable design, the original engraving area is about 380x385 mm, but you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade Up to 935x905mm engraving area, which can help you better handle large area engraving or cutting work. Industrial-grade cutting accuracy: S30 series adopts extremely solid and high-precision linear slide rail X-axis, making it reach industrial-grade engraving accuracy. When comparing small engraving details, the S30 series does not have the wavy pattern that appears in ordinary engraving machines. Detachable laser eye shield: The S30 series is equipped with a detachable eye shield, which will not dazzle even without glasses. Also if you dont need it, you can easily disassemble it.

Safety design: The presented A4 size steel pad can well protect the table from laser damage. Isolate fire hazards. There is a very safe and eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency. Product model number: SCULPFUN S30 Laser information: Diode laser output power: 5W (please note that this is light energy, not electrical energy) Laser focus: 0.06x0.06mm Laser wavelength 455±5nm Focusing method: fixed focus column + sliding device Laser Protective Shield: Equipped with a removable laser protective shield to protect your eyes. You can adjust it up and down or take the goggles off.

Machine information: Engraving accuracy: 0.005 mm Engraving area size: standard version is 410*400mm Machine power: about 60W Air pump: Type: mainboard control air pump, voltage 12V, flow 30L/min Air hose internal diameter: 7.5 mm