Sculpfun S9 Engraving Cutter Machine 90W 410*420mm Laser Engraver Wood Acrylic

SCULPFUN S9 Characteristics: Latest laser beam shaping technology: S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel . Fast Focusing Design: Combines a fixed focus lens and a sliding design. You just need to move the laser and tighten the screws to complete focusing. This makes it very easy to use. Solid and easy assembly structure: The design of the full metal structure ensures the stable operation of the machine and improves the engraving accuracy.

Assembly can be completed in 10-20 minutes. The structural frame is very durable and can be retrofitted. During use Wide Compatibility: The machine is compatible with various sophisticated engraving software such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Switch system (LightBurn), and supports JPG, PNG engraving file format , DXF , SVG, G-Code, NC, BMP etc. Safe Design: Laser filter cover filters 98% of ultraviolet light for eyes. And comes with an A4 size steel base to protect the table from laser damage.

Isolate fire hazards. Square Measuring Ruler: X-axis and Y-axis contain precise scale lines that allow you to quickly measure the size of engraving objects. The large engraving interval of 410x420mm can meet your various engraving needs. Specifications: Model: SCULPFUN S9 Engraving size: 410*420mm Engraving materials: wood, paper, cardboard, plastic, white, circuit board, aluminum oxide, 304 stainless steel, ceramic, dark stone Cutting material: wood, acrylic, cardboard, fabric, bamboo, plastic board, KT board Machine power output: 30W (nothing to do with the cutting or engraving power, it only consumes electricity) Diode laser power: 5.5-6W Laser wavelength 455 ± 5 nm Engraving accuracy: 0.01mm Focusing method: fixed focus laser + sliding device Laser protection cover: The light filter cover on the laser protects the users eyes and prevents animals from grabbing the laser dot. Operating Software: Compatible with LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, etc.

Operating System: Compatible with Switch system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats. Data transfer method: USB connection Power supply: International universal standard input: 100-240V AC, 50/60Hz output: 12V 5A Machine weight: 3.0 kg Package weight: 4.4 kg Packaging size: 59 x 34 x 12 cm/23.3 x 13.3 x 4.7 inches Note: ●For detailed machine instructions, please refer to the parameter settings manual. ● When operating the laser engraving machine, please install the laser protection cover. If it is not installed, you must wear safety glasses.

● Please do not touch the laser emitter with your hand, otherwise you may burn your hand. ● Please avoid strong impacts on the machine. ● Children under 14 years old are not allowed to use this product, and children over 14 years old must be supervised by adults. ● The light engraving machine must not be used directly on mirror-reflective objects, which may cause injury to the operator or laser burns. Package list: 1 × X-Axis Assembly 2 × X-wave 2 × Y-shaft 2 x Belts 1 × Control Box Module Kit 3 × Support Feet 1× laser module set 1 × Power Adapter 1× USB cable 1 × Tool Set 1 × Safety glasses 1 10 x 10 cm wood chips, 3 mm thick 1 × 10 x 10 cm wood chips 10 mm thick 1 × A4 Size Steel Desktop Protective Pad