Synrad Galvo Laser Engraver System W/software, Needs Control Card Fix

Selling the following system as a set: •1/ea: Synrad model 48-1SAL, 10W (30W max input) CO2 RF laser; has 75-80% power charge per laser power meter (see photo).•1/ea Synrad model DC-1 Power Supply, 100-250VAC input, 30VDC output (Astec LPS255)•1/ea custom height-adjustable marking platform with alignment/centering fiducials (it is brand new/ unused, designed to work with 125-370mm lenses).•2/ea Synrad model FH/Index galvo/servo laser marking heads. Both galvo heads are included and in good working condition, both have collimator lenses installed, no physical damage.•1/ea Synrad model FLA-370 lens, 370mm focal length F-theta lens (for long distance, wide field-of-view marking/cutting)•1/ea Synrad model FLA-125H lens, 125mm focal length F-theta lens (for long distance, smaller field-of-view marking/cutting, with very high detail)•1/ea Synrad model FLCC PCI controller card, revision 6, FW revision 10 (p/n 100-18593-01A 80-018593-01 Rev C). Includes optical and co-ax cables. Note: working but does not seem to drive the marking heads properly… I suspect it might need to be repaired/replaced (see notes below).•1/ea Dell OptiPlex 380 2.93GHz PC with Windows XP, 150GB HDD, with Synrad WinMark Pro V4.0 software installed, including software hardlock emulator (software license hardlock built into machine). Includes 17” LCD monitor as shown.•Includes PDF versions of manuals for all the equipment and software Notes about history of this system and the functional issue described above: •I purchased this system at a local auction last year (an industrial operation going out of business).

The system powers up, the software functions, the laser powers on/off and controls power output properly, galvo heads move, etc. However, the system only outputs rectangular shapes when the laser speed is set at lower speeds. I contacted Synrad customer support, the suggested it might have an issue with the galvo head or controller card. I purchased the second galvo head on classifieds board, and the functional issues are exactly the same. So, the system probably needs a new FLCC PCI controller card (you can purchase these on classifieds board, or resellers like Radwell International for $350-700/ea).

Maybe I’m just using the system incorrectly! In any case, I don’t need the system and don’t want to invest more to fix it. •I custom built the marking platform per specifications included with the Synrad documents. The marking platform slides up and down, centered below the laser beam output, and rigidly locks in place. •All components listed above are in very nice physical condition – very clean, lenses are in great condition, etc.

Note that the desk/stand for the system and the laser power meter (shown in pictures) are not included. Everything else listed above is included. Only selling as a set, not selling individual parts! Shipping to USA only.