Universal Laser Systems X2-600 Laser Cutter And Engraver

Good condition - includes one UL-50 50 watt laser (there is a slot to install a 2nd laser if you like), honeycomb table, rotary fixture, and air assist. Buyer pays actual freight/shipping cost. We can provide a shipping quote if you provide the following: 1) Your zip code 2) Are we shipping to a business, or residence? 3) Will we need to send a truck with a lift gate? Generic Specs from manufacturer: This is a Universal Laser Systems, Inc.

X2-600 laser engraver with UL-50 50 W CO2 laser cartridge, dual cartridge capacity, 1.5, 2.0, and 2.5 in focusing optics, Computer-Controlled Air Assist, driver software, and user manual. The X2-600 laser engraving, cutting and marking system combines a large work area and up to 100 watts of power using two laser cartridges. Using two laser cartridges has advantages over a single higher power laser, including better low power stability and more security knowing that your laser system will still be productive with one laser. It is common to own an X2-600 and use it with two lasers for high power cutting jobs and then take one laser out and use it in another laser platform allowing two different jobs to be performed at the same time. Laser Compatibility: UL-15, 15 W UL-20, 20 W UL-25, 25 W UL-30, 30 W UL-35, 35 W UL-40, 40 W UL-45, 45 W UL-50, 50 W These air-cooled, RF driven, sealed CO2 lasers come in the pre-aligned Quick Change Cartridge™.

The X2-600 accommodates up to 2 laser cartridges in any power combination. Power Control Digital power control continuously variable from 0-100%, automatic proportional pulsing and color linked power settings. Resolution 1000 x 1000 to 200 x 200 DPI. Also has low resolution draft mode and choice of error diffusion or half toning for grayscale images. Operating Modes Optimized landscape or portrait modes with raster or vector engraving, vector cutting or combined vector/raster processes, rubber stamp mode.

Computer Interface Centronics parallel, RS232C Serial; compatible with Windows 95, 98, Me, 2000, XP, 7, and 8. Memory Buffer Intelligent buffer with automatic data compression stores up to 99 files with all settings; files are addressable and repeatable in any order and may be deleted after completion to free memory; buffer can be switched to single file mode. Computer-Controlled Air Assist Computer-Controlled Air Assist suppresses flaming and provides optics protection when cutting and engraving high debris materials. Pressurized air or gas is used to protect the moving mirrors and lens. The system is controlled by the print driver allowing high or low pressure air/gas to be turned on or off during the job.

Display Panel LCD display shows current file name, laser power, engraving speed, run time, files loaded into memory buffer, setup and diagnostic menus. Safety Class IIIA interlocked safety enclosure. Exhaust Two 4" connections requiring 500 CFM total (250 at each connection) air flow at 6 inches of water. Features 32"x18" Work Area Integrated Multi-Beam Combiner™ for User-Selectable Laser Power Cross-Platform Compatibility With Air-Cooled Quick Change Laser Cartridges™ Accommodates Up to Two Laser Cartridges in Any Power Combination 15-100 Watt Rapid Reconfiguration Capability™ RACER™ Motion Technology Computer-Controlled Air Assist Suppresses Flaming and Protects Optics Motorized Z Axis Auto Focus X-Y Beam Positioning System Self-Aligning Spring Loaded Sealed Bearings Protected Optical Path Interchangeable Focusing Optics in Enclosed Lens Cartridge Flash Upgradable Electronics Job Complete Indicator Relocatable Origin Enhanced Vector/Raster Cutting and Rubber Stamp Mode Specifications: Resolutions [dpi]: 1000 x 1000 500 x 500 333 x 333 250 x 250 200 x 200 Maximum Part Size: 37” W x 23” D x 9” H Focusing Optics: (2X) 1.5 in, 0.003 in spot (1X) 2.0 in, 0.005 in spot (2X) 2.5 in, 0.007 in spot Laser Cartridge: UL-50 (50 W) Ambient Temperature Range: 50 to 95 °F Work Area: 32 x 18 in Actual Power Output: 48 W Table Size: 37 x 23 in AC Input Power 220 VAC, 50/60 Hz, 15 A