【Upgrade】Autofocus Co2 Laser Engraver Laser Cutting Machine 100W Laser Engraving

【Upgrade】Autofocus Co2 Laser Engraver Laser Cutter Machine 100W Engraving Cutting DESCRIPTION This 100W CO₂ laser engraver continues to uphold our previous high standards , TL-A1 control panel(Equipped with laser engraving and cutting software AutoLaser, support CorelDraw, Lightburn, AutoCAD, Illustrator export menu, support custom development), LCD display, large 32x40 inch working area, and pass-through doors that allow even larger pieces to be worked on. And the running system of our machine is Windows. But if you use the Lightburn, it can compatible with iOS system and Linux.Supports multiple graphic formats such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI, etc. You can transfer the file to the device with a USB memory stick or download it directly from the comput er to the device with a USB cable. Even in the same job, you can set different colors in the software and drill holes.

The machine has doors that can be opened to accommodate larger materials. Adjust the workbed up or down from the control panel and the provided sensors will let you automatically adjust the laser beam to compensate. ; automatically cuts off the laser beam if the protective cover is opened; and provides an installed air assist to blow debris clear of the laser as it is created. Applicable Material: Mainly used for laser cutting and engraving of non-metallic materials, such as clothing fabrics, leather, leather goods, wood products, paper, shellac, plexiglass, rubber and plastic, cell phone accessories and so on. Note: After 3-4 hours of work, there should be a break of about 30 minutes.

SPECIFICATIONS Laser Power 100W Laser Tube Length 1250mm Laser Wavelength 10.6um Laser Tube Brand Reci Engraving Area 1000x800mm / 40x32in Bench Adjustment Electric up and down lift 20cm Positioning Accuracy ±0.01mm Engraving Speed 0-800mm/s Software Running Windows ( but if you use the Lightburn, our machine can also compatible with iOS system & Linux) Engraving Cutting Depth 0-10mm (for reference only, depending on different materials and power) Subsidiary Positioning Red Light Positioning Included Software Autolaser Control Motherboards TL-A1 Software Compatible CorelDraw、AutoCAD、Illustrator、LightBurn Data Transmission USB、Web Port、U-Disk Power Supply AC220/ 50HZ Product Size 1460*1175*600mm Product Weight 123kg TL-A1 Controller TL-A1 Control Panel -The TL-A1 is a motion control system for small laser engraving and cutting machines, based on 2.4 "color screen design, with more optimized space design. Support 3-axis motion control and 1-way laser control, equipped with laser engraving and cutting software AutoLaser, support CorelDraw, AutoCAD, Illustrator export menu, support custom development. ADVANTAGE Fast Autofocusing - With the pre-installed autofocus tool, you can quickly correct the focus of your laser directly from the control panel without having to deal with cumbersome acrylic tools and tedious manual adjustments. Dual Engraving Platforms - The honeycomb cutting platform provides stability, noise reduction and heat resistance for smaller items. The aluminum blade cutting platform provides adjustable height and intense rigidity for larger items like acrylic blocks.

Features Powerful Laser Tube- Our CO₂ laser tube provides 100W of power for up to 8000 hours. One USB port reads flash drives while the other connects directly to your PC via dedicated cable. The Ethernet port allows you to work remotely online. The 40″ × 32″ (1000×800 mm) workbed gives you plenty of space to work on wood, rubber, plastic, paper, fabric, leather, ceramics, tile, fiberglass, marble, stone, and more—even before you open the integrated pass-through doors that permit you to work on even larger pieces! Engrave or cut almost all non-metallic materials.

Supports USB2.0, offline U-Disk and WIFI to transfer data. Collaboration software: CorelDraw、AutoCAD、Illustrator、Lightburn. A large, fully transparent acrylic plate observation window. The whole working area and the working process come into view. The power supply is equipped with an LCD display.

The LCD display shows the current and automatically detects errors. When problems occur, you can troubleshoot according to the instructions. The power supply and motherboard of our machine are installed separately to effectively avoid magnetic interference. The performance of the machine can be kept optimal. Built-in air support function and exhaust fan, no additional installation required, simplifies installation.

They help to clean the dirt, gases and heat in the working area, making engraving and cutting always efficient and accurate. The speed, power and other settings can be adjusted through the control panel. With the raster graphic/color vector assignment system, you can adjust the engraving speed and power by color coding. Reinforced and more robust machine housing ensures safe transportation and longer service life. Red Dot Guidance - A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.

Built-in Air Assist - A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. Safe Protection - The widened viewing window is made from flame retardant material to ensure lasting safe use. The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work. The water cut protection system protects the laser tube from being burned out.If the water cooling system fails suddenly, the temperature of the laser tube will rise.

At this moment, the water protection system will immediately cut off the power supply to the laser tube to prevent the laser tube from being burned out. The E-Stop safety button immediately stops the machine in case of emergency. FDA Compliant Laser Warning Light - A red light indicates that the machine is working and needs to pay attention to safety; A green light indicates that the machine is ready to work. Front and Rear Double-pass Doors - front & back - letting you cut materials larger than the bed size by sliding them across the engraving table.so the extra long objects can be engraved/cut. The worktable can be moved up and down to fit a variety of engraving materials and products.

Experience UK-Based Support & Service - Our company is headquartered in the U.K. And has warehouses all over the world. Place your order for a laser engraver today and enjoy fast UK-based shipping, along with ultrafast customer service and tech support. PACKAGE INCLUDED SHIPPING 1.Ship to paypal address only, Packstation address is not acceptable. 2.We have warehouses in UK and choose from the nearest warehouse to ship according to the customer's address.

Estimated delivery 2-4 working days to major locations, 4-7 working days to remote areas. PAYMENT 1.Please note that we only accept Paypal as payment method. 2.After you have ordered, you must pay within 7 days. 3.Please just contact us if there is any problem in payment. 4.All transactions are 100% secure.

ABOUT US Our company is a leading professional classifieds board Megastore , We deliver a wide range of products, from Industrial supplies to economical lifestyle goods, to provide you with a premium classifieds board experience. We offer detailed product descriptions and images to give you a real advantage in finding the products you're looking for. With a cutting edge online operating system and fantastic customer support, buyers are guaranteed to receive quick replies to enquiries, prompt delivery to your home or business, and outstanding after-sales service. RETURN POLICY If you do not like the goods and would like to return them to us, please see below: 1. Before returning the goods to us, please tell us first.

All returns must be pre-approved by seller 2. Please return the goods to us within 7 days after you have received the goods. 3. Please confirm the goods as original packing. 4. If the goods are broken during transportation, we can refund your money or we will exchange you new goods. 5. But please do not forget to send us some clear photos.