1500W Vfd Usb 4 Axis 6090 Engraver Cnc Router Engraving Milling Cutting Machine

CNC Router engraving machine parameters: Model: CNC6090GZ Outside dimension:1150*970*650mm(L*W*H) Working platform size:1045*720mm(L*W) Frame Material：The whole machine used 6061 aluminum profiles Max. Feeding height:≤140mm(From base of Z axis to platform) X,Y,Z Working Area:900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis:ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor：57 two-phase 3A (with handwheels) Driving Power for Stepping motor：AC110, 240W, out put:DC24V10A Maximum Idle speed:1500mm/min Working Speed :50-1500mm / min (different material with different speed settings)1500W VFD USB 4 AXIS 6090 ENGRAVER CNC ROUTER ENGRAVING MILLING CUTTING MACHINE4Axis USB 1500W CNC Router Engraving Machine Engraver For Wood Acrylic 6090 Ball Screw IMPORTANT!!!!!!!!!!!!!!!! Plz Note: The Handwheel Controller Will Not be Shipped Out Immediately, you can wait for it for 15days or you can Leave a message to me to remove the Handwheel from the Selling and we will refund you 30$ for the handwheel, please understand.SKU: 1500W-6090T1-USB+1500W-6090T2-USB+TS009USDescription: CNC Router engraving machine parameters:Model: CNC6090GZOutside dimension: 1150*970*650mm(L*W*H)Working platform size: 1045*720mm(L*W)Frame Material：The whole machine used 6061 aluminum profilesMax. Feeding height: ≤140mm(From base of Z axis to platform)X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z) Sliding unit:X axis:SFU1605 Ball ScrewsY axis:SFU1605 Ball ScrewsZ axis:SFU1204 Ball Screws Drive unit:X axis: Ø20 High intensity round rail,Y axis: SBRØ20 high-strength aluminum base railsZ axis: Ø12 high-strength round railStepping motor: 57 two-phase 3A (with handwheels)Driving Power for Stepping motor: AC110, 240W, out put: DC24V, 10AMaximum Idle speed: 1500mm/minWorking Speed: 50-1500mm / min (different material with different speed settings)Spindle motor: 1500W high-speed variable frequency spindle motor , ER11 chuck, with 6mm collet.(tips：1. The spindle motor must connect with the VFD. 2.

It cannot directly connect with the supply voltage (AC 110V). 3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.) Drive of Stepping motor: 0-3.5A adjustable four-axis drive(TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision)Repositioning precision: ≤0.05mmCooling: Water-coolingSpeed: 0-24000r/mSpindle precision: Radial runout ≤ 0.03mmCarving command: G code / TAB file / nc file / NCC fileVFD: AC110V, 1500W, 0-400Hz (built-in control box)USB Control box parametersProtection: Emergency stop buttonCommunication interface: through USB PORT connect with computersupport system: Windows XP / win7 with 32 bitInput Volts: AC 110V Application industry: Woodworking industry: sculpture, round carving, wooden handicraft processingAdvertising industry: advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative productsOther industries: The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry,such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter , making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. Feature:1. The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood.2. Water cooling spindle works more stable and durable.3. High quality accurate ball Screws drive make the engrving more precision.

Anti-blackflash, high precision, long life circle. How to use:1. Assembling and locating the CNC machine on steady desk well. 2. Make sure that your computer has a USB port output. 3. Place the control box in a ventilated dry place where there is no dust, no moisture 4.

Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. 5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Otherwise, it will damage the driver of the controller.6. Correctly instal the Spindle motor and the heat pump.

The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.7. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.8. You can enjoy making you dream with using our CNC machine now. Description: Waterproof design, very durable, anti-dirt, oil spray Power by USB port Dimensions: 22 x 8 x 3cmThe usb self-check light, you can type the " scroll" on the keyboard to activate it.Directional motion control: X+,X-,Y+,Y-,Z+,Z-,A+,A- Feed rate control: F+,F- Jog rate: J+,J- Spindle speed: speed up, slow down Programming: E-stop,cycle start,spindle on/off,Redo,single step,original pointPackage Include 1 * Remote controller 1 * CableDescription 1500W VFD USB 4 AXIS 6090 ENGRAVER CNC ROUTER ENGRAVING MILLING CUTTING MACHINE + REMOTE PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept classifieds board payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction.

Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business.

Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? U. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately.

But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with classifieds board message.Please feel free to contact us if you have any questions. : Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with classifieds board message.Please feel free to contact us if you have any questions.shipping noticeCan not ship to Puerto Rico,Alaska/HawaiiStepping motor57 two-phase 3A (with handwheels)Spindle motor1500W high-speed variable frequency spindle motorSpindle speed:24000 rpmPrincipal axis collet:ER11 chuck, with 6mm collet.CoolingWater-coolingModel6090Working platform size1045*720mm(L*W)Communication interfaceUSB PORTMPNDoes Not ApplyBrandUnbranded/GenericX,Y,Z Working Area900(Y)*600(X)*140mm(Z)Max.

Feeding height≤140mm(From base of Z axis to platform)ControlCNCMachine Type4 Axis Router MachineWarranty3 yearOn Mar-13-22 at 18:45:19 PDT, seller added the following information: