20W 110X110MM Portable Fiber Laser Metal Marking Machine Engraver Machine

Fiber laser marking machine uses laser beam to print permanent marks on the surface of various materialsThe effect of fiber laser marking machine is mainly:1, through laser light energy to the target material surface evaporation and expose the deep layer of material;2, by laser light energy leads to the chemical and physical changes of the surface material, "carved" out of the desired text;3, burn material by laser energy, so as to show the required etching patterns and text.Fiber laser marking machine mainly consists of fiber laser, vibrating mirror (hit head), software control board, industrial control computer, chassis, cabinet, horizontal table and so onFeatures are as follows:1. Fiber laser marking machine using fiber laser, life up to 100 thousand hours, the superior performance of the world ranking.The beam quality is high, the output is TEM00, the focus spot diameter is less than 20um., the divergence angle is 1/4. Single line of semiconductor pumping laser is finer, especially suitable for fine and precise markingSmall size, small power consumption, the whole power consumption less than 500W; built-in air-cooled cooling mode, abandoned the heavy water-cooled units, small footprint, easier to install, truly energy-saving and portable The electro-optical conversion efficiency is high, simple and easy to use, without optical adjustment or maintenance, compact structure, high system integration, and few failuresWithout any maintenance, the service life is long, suitable for harsh environment work 4. No need for any maintenance, long service life, suitable for harsh environment workThe processing speed is fast, it is 2-3 times of the traditional marking machine, the optical scanning galvanometer, the laser repetition frequency is high, the high speed has no distortionAll fiber laser with optical isolator can effectively shield the reflected light, in gold, silver, copper, aluminum, silicon and other materials on the surface of high bright reflection operation, do not need to deviate from the center of the field lens, greatly broaden the application fields. And for different metals, by adjusting the frequency and energy it can effect a certain color.Marking software is powerful, compatible with Coreldraw, AutoCAD and other software files; support PLT, PCX, DXF, BMP and so on, can be directly used SHX, TTF font support; automatic encoding, printing serial number, batch number, date, bar code, two-dimensional code, automatic jump numbers, USB interface output control.Equipment technical parameters and applicable environmentBeam qualityM2:1.5 (TEM00模)Average output power from the device20wThe maximum marking speed12000mm/s laser wave length 1064nmMarking Area110mm110mmRepetition rate20KHz-80KHzPower adjustment range5%-100%Minimum character0.2mmX0.2mmMarking Depth0.01-1.0mm（视材质而定 As the material and）repeatability precision 0.001mmminimum line width0.013mmPower consumed500wcoolant passage风冷 forced air coolingcontrol interface USBContinuous work time24hEquipment working environment干净无灰尘或灰尘较少 Clean, no dust or less dustEquipment operating temperature13C－ 28Cambient humidity5% -75% 无结露 power requirement AC220V/50HZ loading list mainframe of optical fiber marking machine*1Power line *1USB data transmission line *1 Foot switch *1 Software CDs*1