Algolaser Atomstack Sculpfun Daja Laser Engraver Engraving Carving Machine

ATOMSTACK MR20 20W Laser Module Features: ▶ High power: The worlds first 1064nm wavelength pulsed fiber infrared laser module with optical power up to 20W, using Q-switch (photoelectric switch) master oscillator and high-power fiber amplifier (MOPA) structure. ▶ Applicable to multiple materials: The MR20 fiber laser module can be used for high-speed and fine engraving on all daily metals (copper, iron, aluminum, zinc, silver, etc.) and plastics. It can also be used for engraving on black acrylic, leather, ceramics and rocks. ▶ Metal cutting: 20W powerful power and 0.03*0.06 ultra-fine light spot allow MR20 to easily cut 0.2mm aluminum business cards at one time and 0.5mm brass sheets multiple times. ▶ High adaptability: The MR20 module can be quickly installed and adapted to the frames of all Atomstack brand laser engraving machines, and can expand the working area to 850*400mm or 850*800mm.

▶ Customized lightburn control motherboard: In order to be controlled by the lightburn software, MR20 has customized a special control motherboard for the infrared laser module. It can set the laser power through lightburn and adjust the pulse frequency with the knob, which greatly improves the ease of work. ▶ Optical fiber conduction: Energy transmission adopts optical fiber conduction, which can greatly improve energy transmission efficiency and reduce energy transmission loss. ▶ Deep cutting & Simple focus: 1064nm infrared laser is very suitable for deep engraving on neat stone slabs to show relief effects. Simple dual red light focusing method, easily obtain the best focus in 30 seconds.

▶ Laser rust removal: MR20 1064nm wavelength laser is very suitable for removing rust on metal surfaces and can quickly laser rust remove metal. Specification: Product model: MR20 Engraving material: PCB version, acrylic (non-transparent), alumina, electroplated and painted metal, 304 mirror stainless steel, glass (non-transparent), ceramics, slate, leather; Cutting material: thin stainless steel sheet, thin aluminum sheet; brass sheet; Laser output optical power: 20W Laser working power consumption: 90W Laser wavelength: 1064nm Spot size: 0.03*0.06mm Maximum pulse energy: 0.7mj Light pulse width: 80-110ns Repetition frequency: 30-60kHz Peak power: 7kW Power supply: 24V DC Precautions: ●When operating the laser engraving machine, please install the laser protective cover; if it is not installed properly, you need to wear goggles. ●Do not touch the laser with your hands, otherwise your hands may be burned. ●Please avoid strong impact on the machine. ●Children under 14 years old are prohibited from using this product.

Children over 14 years old require adult supervision. ●The laser cannot be applied directly to any specular reflective object, which may cause injury to the operator or burn the laser. Packing List: 1 x MR20 Laser Engraving Module MR.CARVE M1 Pro-2W Features: ▶ Faster & More Precise Laser Marker: Up to 10000mm/s carving speed, only spend 13sec to carve a 7x3.5cm aluminum alloy nameplate, while other marking machine carving the same material takes 1 minute and 15 seconds. Perfect marking machine apply in any scene of industrial production. ▶ Upgraded Design: M1 Pro engraver support use with rotary axis and rotary fixture (both accessories are included) for Cylindrical object carving, perfect for rings, baseball bat, mug, etc.

▶ Great Performance: Adopt Infrared laser which has a very strong controllability, engraving objects, can be adjusted by power size and engraving speed to achieve the most ideal marking accuracy, fully meet the market product surface marking requirements. Suitable for DIY creation and industrial production. ▶ Portable Laser Machine: M1 laser machine weight only 5.7kg, much lighter than other engraver, and the volume is the same as that of a laptop, easy to carry to Office, home and studio etc. ▶ Support Various Material: Available to carve at metal and non-metal (metal pet brand, metal pendant, stainless steel kettle, plastic buttons, PVC pipe, plastic shell, acrylic plate, leather wallet and wine jug, metal U disk, electroplated metal, stainless steel material. ▶ Batch & Large Objects Carving: With dual red light positioning, support batch carving with just one time to set the parameters.

Design 180° rotating lens support to carve any patterns in a large object such as luggage, unlimit your creation. ▶ Versatile Functionality: The MR.CARVE RT5 Rotary Axis is a laser engraving machine accessory designed to engrave objects with diameters ranging from 5 to 30cm. Its built with a full metal body to ensure durability and stability during the engraving process. The maximum weight of the object to be engraved should not exceed 3kg. Specification: Model: M1 PRO Brand: MR CARVE Product Size: L 300mm x W 200mm x H 320mm Product Weight: 5.7kg Carving Speed: 10000mm/s Wavelength: 1064nm Temperature: -10°C~65°C Cooling Method: Built-in fan Accuracy: ≤0.001mm Standard Engraving Area: 70x70mm Support system: Win7/Win8/Win10/ WIN11/XP Application software: Computer operating engraving software Power: Below 300W Line Width: 0.001-0.05mm Package Size: 455x170x520mm/17.9x6.6x20.4in Package Weight: 9.4kg/20.7lb Packing List: 1 x M1 Pro Laser Marking Machine Kit 1 x RT5 Rotary Roller 1 x RF1 Ring Fixture 1 x Round Plate T6 Features: Made of good quality material, features high speed and superior performance, our laser engraving machine is sturdy and with great durability.

Its suitable for DIY lover, CNC engineer, artist and more. Adopts linear optical axis with high accuracy, with adjustable focal length, this laser engraver is designed for quick and precise engraving. With a light shield to protect your eyes, you can print while viewing directly. Replaceable laser module design, we provide you with 5 kinds of output power for option (5.5W/ 10W/ 20W/ 30W/ 40W). Different laser modules for engraving/ cutting different kinds of material and different thicknesses.

Integrated design, compact size. No installation required, easy to use. Fin heat dissipation, plus optical axis heat dissipation, extending its service life. With type-C interface, the engraver supports PC software, compatible with GRBL; supports OTA upgrade; supports TF card; supports vector editing; supports different kinds of picture format and svg, gcode files. Note: 1.

Better wear laser goggles during usage and avoid touching the laser directly with your eyes and skin. 2. If your laser module has any problem, please DO NOT dismantle it freely. It will destroy the laser module. 3. If you have any quality problem with the machine, please feel free to contact us. Many operating problems can be solved according to your video and problem description.

Thank you. 4. Size and color may be slightly different due to manual measurement and different light conditions. Thanks for understanding. Specifications: Plug: AU Built-in Module Power: 40W Focal Length: Adjustable Main Color: White + Silver Main Material: Plastic + Metal Model: T6 Wavelength: 450nm Image Format: Multiple File Format: svg, gcode Interface: Type-C OTA Upgrade: Support Compatible with GRBL: Support Item Size (without bracket): Approx. 292 * 290 * 67mm / 11.50 * 11.42 * 2.64in Item Weight (without bracket): Approx.

1342g / 2.96lbs Package Size: Approx. 36.5 * 35 * 13.5cm / 14.37 * 13.78 * 5.31in Package Weight: Approx. 2450g / 5.40lbs Package List: 1 * Laser Engraving Machine 1 * Pair of Goggles 2 * Bracket 1 * Cross Screwdriver 1 * Whiteboard Marker 1 * USB Cable (Type-C) 1 * Power Adapter 1 * Plug TWO TREES TTC-450 Features: ▶ 80W Module, powerful 775 spindle, with rigid H-Beam structure, Leadscrew Driven, Y-Axis Dualscrew drive, Z-Axis Optical Axis Drive deliver more stability than the traditional V-slot drive. ▶ Easy to engrave and cut various materials such as MDF, PVC, acrylic, solid wood, particle board, plywood, organic board, epoxy resin, nylon, PCB, aluminum, copper, carbon fiber board, etc. ▶ Adopts X, Y, Z three-axis movement control, the Z-axis movement accuracy is up to 0.0025mm,thereby improving the accuracy and stability of the product.

▶ The engraving head is compatible with a wide variety of clamp sets for different carving needs. Comes with a blade head. ▶ Equipped ESP32 chip, 32-bit microprocessor, high speed dicing. Built-in WiFi module, it supports Computer, APP, and Screen control directly. ▶ All metal structure, 70% pre-assembled parts with modular design makes installation easier than ever before.

460x460x80mm work area provides a large space to create. Specification: Model: TTC-450 Engraving area: 460x460x80mm Power adapter power: 120W, 5A, 24V Spindle parameters: 24V 5A, 775 motor 8000RPM Tool setting method: software control Control Board Compatibility: GRBL Engraving speed MAX: MAX 800mm/min Limit switch: X, Y, Z three-axis double limit + ESTOP Engraving accuracy: 0.01mm Stepper driver: A4988 1.3A (other drivers can be connected to the motherboard) Linear transmission mode: built-in POM wheel Stepping motor: NEMA 23 (2 phases, 1.5A) torque 20mN. M Transmission type: T8 screw pitch 2mm lead 4mm screw rod Y-axis: Double Y-axis with built-in rollers Emergency stop switch: Yes Motherboard: ESP32 highly integrated chip with low power consumption, high stability and reliability, ultra-high processing speed and large memory, supports offline controllers, supports 4 axes, and supports PWM laser signals. Harness management: XY drag chain Operating system: Windows XP/7/8/10, MAC OS Engraving material: engraving-cutting: MDF, PVC, acrylic, solid wood, particle board, plywood, organic board, epoxy resin, nylon, PCB, aluminum, copper, carbon fiber board, etc. Machine weight: 13.4kg Packing weight: 18kg/39.6lb Packing size: 715x310x280mm/28.1x12.2x11cm Packing List: 1 x TTC-450 Engraver ORTUR Laser Master 3-10W Features: 🔝 Upgrade Engraving Speed: Equipped with new 10W Laser Module which the focusing spot area is only 1/3 of other ordinary lasers, with dual fan and integrated air assist, only 235g weight.

Combine precision engraving and high energy cutting at the same time. It can work very well at high speed of 20000mm/mm, save you over half-time than other similar brands. 🔝 Excellent Engraving Performance: With 400x400mm working area can meet your various engraving needs. Real 10W optical power that soars up with the latest generation of two 5.5W laser coupling technology, is able to cut off 10mm pine board with only one pass, and even cut the 30mm thick black acrylics. With the help of air assist nozzle, which makes the laser blow away the smoke and debris during work to make your engraving work more perfect.

🔝 User Friendly: Supports TF Card/USB/Wi-Fi APP/Access Point Offline Work. Professional APP- Laser Explorer, easy to learn and operate. No need to convert the picture into a Gcode instruction file and directly carve. Once the machine built-in WebUI control program can achieve real offline control with driver and software. 🔝 New Eye-conservation Cover Design: The filter panorama shield can filter 97% of ultraviolet rays, which plays a good role in protecting the eyes.

Without wearing goggles to get a clear view of the laser engraving. Reduce the cost of your goggles and the inconvenience of wearing them. 🔝 Safer and Smarter: Including 7 protections to keep users safety during operating process, such as Sloping Position conservation and Emergency Stop Switch and so on. Using the self-developed 11th generation motherboard - OLM-ESP-Pro-V2.4, with strong computing ability and supports the function of limit free switch and two-way communication, etc. Specification: Model: Laser Master 3 Machine Size: 580 x 550 x 150mm Engraving Area: X400 X y400mm Engraving Speed: 0-20000mm/min Spot Size: About 0.05x0.1 mm Laser Wavelength: 455+5nm Focus: 50mm (From radiators to objects) Modulation Mode: TTL Product material: 70% Aluminum + 15% Steel + 5% Plastic + 5% Brass + 5% Others Motors: 42x60 Y Stepper Motor xl; 42x40 X Stepper Motor xl Available Luminous Power: LU2-1OA (9500-10500mw) Support System: Mobile, Android & iOS PC: Windows & Mac OS; Web File Format: JPG / JPEG / PNG / BMP / SVG / ETC Available Materials of Engraving: Wood Board, Stone, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc.

Available Materials of Cutting: Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc. Input Voltage: 100V-240V (Compatible) 50/60Hz Power Adapter Output: 24V / 4A Operating Temp.: -15℃-30℃ Control Software: LaserGRBL / LightBurn /Laser Explorer ( Ortur APP) Net Weight: 4.3KGS / 9.48lb Gross Weight: 6.5KG/14.33lb Package Size: 660x240x200mm / 26" x9.5" x 7.9" Packing List: 1 x Laser Master 3 Engraver Kit DAJA DJ6-3W Features: ▶ Portable Laser Machine: DJ6 laser machine weight only 1.036kg, much lighter than other engraver, easy to carry to Office, home and studio etc. ▶ Compact But Powerful: Equipped with 3000mW laser head module, 0.05mm laser precision. DJ6 has faster and stronger engraving efficiency. ▶ Various Material to Crave: The laser engraving machine can sculpture your desired picture&logo on various materials.

It is able to engrave on papers, Kraft papers, woods, ceramics, leathers, plastic, bamboos, etc. ▶ Easy to Connect: Compatible with Win7/Win8/Win10/ WIN11/MAC/IOS/Android system. And support multiple format such as JPG, SVG, PNG, DWG, BMP. ▶ Print Anytime Anywhere: Free to connect with mobile device to edit on the APP and print, no need of computer, easily to DIY with this coolest small marking machine. Specification: Model: DJ6 Product Size: 16.5x16.6x16.5cm/6.5x6.5x6.5in Product Weight: 1.036kg Material: ABS+Aluminum Alloy Control Method: PWM Carving Speed: 100mm/s Support system: Win7/Win8/Win10/ WIN11/MAC/IOS/Android Applicable materials: Paper/wood/plastic/stone/leather/Fabric Interface Specifications: Power Port: DC05, Data Port: USB type B Wavelength: 450nm Engraving area: 80x80mm Input power: 24W Laser head power: 3W Image format: JPEG/BMP/TIF/GIF Resolution: 0.05mm Machine Power supply: Voltage 12V 9A Best Focus Range: 30~50mm Maximum Focus: 100mm Application software: Computer operating engraving software Package Weight: 1943g/4.2lb Package Size: 25x25x20cm/9.8x9.8x7.8in Note: 1.

Please download the APP by scanning the QR code in the user manual or search "Engraver" in APP Store(iOS) or Google Play(Android) 2. You can download the driver via https://drive.google.com/file/d/1lrJ8ls0rppjDldI9mOKns81G7g8rUFAn/view? Usp=sharing Packing List: 1 x DJ6 Engraver Kit 4 x Raised Columns 1 x Goggles DAJA DJ7-5W Features: ▶ Excellent Engraving Performance: Machine Size - 29.2x29.2x6.5cm, compact size but higher laser power output. With 150x150mm working area can meet your various engraving needs. Equipped with 5W blue light laser module, 0.06mm laser spot size, 0.01mm engraving accuracy, which is able to cut off 1-3mm wood board with only one pass.

▶ Upgraded Motherboard: The new self-developed chip greatly improves the stability and eliminates disconnection from now on. It can also withstand long-time carving operations. ▶ Various Material to Crave: The laser engraving machine can sculpture your desired picture & logo on various materials. It is able to engrave on papers, Kraft papers, woods, leathers, plastic, bamboos, etc. ▶ Easy to Connect: Compatible with windows, macOS, Android, IOS system.

And support multiple format such as JPEG/BMP/PNG/JPG/GIF/DXF/SVG/PLT. Support self-developed software and mobile APP, no need to upgrade the system firmware can be directly connected to open source Lightburn / GRBL software ▶ Great Design at inner and Outer: With 3 ports - TF card, Type-C, USB, available to connect extension accessory and transfer files for caving. The built-in cooling fan for laser head to extend its service life and eliminates faults. Specification: Model: DJ7 Cooling method: air cooling Laser wavelength: 455nm Laser spot: 0.06mm Engraving range: 150x150mm Engraving accuracy: 0.01mm Maximum engraving speed: 160mm/s Laser: semiconductor blue light Laser optical power: 5W Machine Color: Gray Product size: 29.2x29.2x6.5cm (L W H) Product weight: 1.4kg Product Material: ABS Plastic/Stainless Steel/Copper Output voltage: 12V 5A Input voltage: 100-240V 50-60HZ Supported image formats: JPG, PNG, BMP, SVG, Gcode Device interface: TF/TYPE-C/USB Supported languages: Chinese, Japanese, English and Korean Software support: Mac/Windows/XP Android / iOS Lightburn/GRBL Packing size: 37.5x35.7x15.5cm/14.7x14x6.1in Packing weight: 2.8KG/6.1lb Packing List: 1 x DJ7 laser engraver Kit Algolaser-5W Features: 🔝 High Accuracy & High Speed - Smaller laser spot (0.04mm*0.09mm) with ultra fine lines meets your requirement for details on your work. Up to 12000 mm/min speed is fast enough to supplement your business orders.

Provides 400x400mm large work area to fullfill your great creativity. 🔝 Upgraded Motherboard - Thanks to the upgraded motherboard, the DIY kit compatible laser power up to 20W to satisfy more requirements. With Smart Hub and AUC, it can work with versatile accessories from different brands. Dual-core CPU deliver a significant speed boost, achieving an impressive 32% higher CPU performance and 50% improved energy efficiency. 🔝 Explore More Fun - The ONLY 5W entry-level laser engraver that supports WiFi.

Also support USB-C connection and built-in TF card. For newbies, you can easily get started engraving offline with AlgoLaser App. 🔝 Easy to Upgrade and Expand - The upgraded terminals of the motherboard, as well as modularization design of DIY kit, allows users to extend the existing frame and connect other accessories to achieve more possibilities. 🔝 7 Safety Protections - Equipped with multiple detections to protect users, which including Machine Offset Detection and conservation, Machine Tilt Detection and conservation, USB Connection Detection and conservation, Beam detection and conservation, Current and Voltage Detection and conservation, Emergency Stop Switch and Key Lock. 🔝 User-friendly Installation - There are few cables need to connect and each one its just the right length for its position.

The assembly takes only 10~15 mins with instruction help, even for newbies. Specification: Product type: Square frame engraving machine Product size (mm): 642 x 602 x 166mm Product weight: 2.0kg Product gross weight: 5.0kg Product color: black + red Frame material: aluminum alloy Driving mode: X-axis single motor drive, Y-axis single motor drive Engraving stroke (mm): 400 x 400mm Maximum engraving speed: 20000mm/min Laser module Model: ALM-5BD Product size: 64 x50 x 137mm Light source technology: polarization combined light Working optical power (light source): ≥5000mW (5W) Laser wavelength: 455±5nm Focal length: 5mm from hood Spot size: 0.04mm x 0.09mm Lens material: glass Working frequency: 10000 hours Machine power consumption: 72W Power input: DC24V/3A Standby power consumption: 10000 hours Max Engraving Speed: 12000mm/min Movement Speed: 20000mm/min Focus Mode: Manual Cutting Material: All kinds of wood, (but be aware of oily wood or wood with very high resin content, as there is a high risk of fire.) plywood, Cherry Wood, Walnut, MDF, cardboard, corrugated board, black acrylic, cork sheet, PolyVinyl Chloride, ABS sheet, Rubber, Depron foam, non-woven fabric, leather, colored paper. Engraving Material: All kinds of wood, (but be aware of oily wood or wood with very high resin content, as there is a high risk of fire.) plywood, MDF, acrylic, PolyVinyl Chloride, Cardboard, Coated Duplex Board, Leather, Colored Paper, Canvas, Denim, Rubber, ABS, Bamboo, Stainless steel, Cold Rolled Sheet, Coated Metal, Dry Leaves, Clear Acrylic with Color Paper. Machine Power: 120W Power Supply: 24V/5A Motherboard Version: ALGOLASER_DIY_KIT_V1.2 Working Area: 400x400mm Offline Engraving: Supported Connection Method: TF Card, USB C, Wifi-2.4G Software Supported: LightBurn/LaserGRBL/AlgoLaser App File Format Supported: JPG, SVG, PNG, BMP, G-code, CAD, AI, CDR, DWG, etc. System Supported: Android, iOS, Windows, Mac OS, Web-based Product Size: 642 x 602 x 146mm Package Weight: 5.27kg/11.6lb Package Size: 650 x 295 x 145mm/25.5 x 11.6 x 5.7in Packing List: 1 x DIY Kit Laser Engraver 10W Kit Algolaser Delta-22W Features: ♦ Algolaser Delta Laser Power & 500+Color Engrave: Adopting the advanced second-generation COS technology, the polarized beam combination improves the performance of the laser beam by 40%.

Compared to regular 22W laser modules, COS technology compresses the laser spots from a rectangle to a square having a near 1:1 ratio on both low (3%) and high power (100%). ♦ Incredible Cutting Ability: Upgraded engraving speed 30000mm/min, this blazing fast speed allows you to significantly boost your work efficiency and fulfill a higher volume of engraving orders in a shorter time. Its able to cut 10mm Birch plywood, 15mm Basswood plywood, 10mm black acrylic, 0.1mm Steel plate with one pass. ♦ Dual core CPU & Built-in Air System: More mighty main board delivers significant speed boost, achieving an impressive 32% higher CPU performance and 50% improved computing power. Equipped with 30L/Min air assist pump kit, which could improve the cutting and engraving speed with more clean surface and extended service life.

♦ User-Friendly Design: 4 connections to apply - TF Card/USB/Wi-Fi/APP. And the engraver can work without network by insert the TF card. No computer restrictions, engraving work anytime, anywhere. Delta 22W Laser Engraver is compatible with LightBurn (with air assist function M8), LaserGRBL, LightBurn, Algolaser-developed APP, and support Windows system, support MAC system. ♦ 6 Robust safety protections: You can have peace of mind knowing the AlgoLaser Delta 22W keeps you safe.

Real-time monitoring detects anomalies and automatically triggers protections to prevent damage. Specification: Model: Algolaser Delta Laser Power: 22W Laser Spot Size: 0.06x0.05mm Laser Wavelength: 455±5nm Focal Length: 55mm Laser Head Life Expectancy: 10000+hours Max Engraving Speed: 30000mm/min Movement Speed: 40,000mm/min Focus Mode: Auto/Manual Working Area: 440x415mm Connection Method: TF Card, USB-A/C, U Disk, Wifi-2.4G/5G Laser Type: Diode Focus: 50mm(From radiators to objects) Input Format: jpg, svg, png, bmp, G code, CAD, AI,CDR, dwg, etc. Lens Materials: Professional Focusing Optical Glass (Fused Silica & H-K9L) Motherboard Version: ALGO_LASER_V3.2 3.5 IPS Screen: ✔ Offline Engraving: ✔ RGB Indicator Light: ✔ Intergrated Air Pump: ✔ Output Volume: 30L/min Machine Power: 144W Power Supply: 24V/6A Software Supported: LightBurn/LaserGRBL/AlgoLaser App Laser Module Lifetime: 8000-10,000 Hrs Operating Temp: -10℃-40℃ Product size: 650x730x240mm Package Size: 795x720x145mm Gross Weight: 12kg Available Materials of Engraving: Wood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc. Available Materials of Cutting: Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc. Best One-Pass Cutting Material and Thickness: 10mm Birch Plywood 12mm Basswood Plywood 5mm Eucalyptus plywood 30mm Pine Board 15mm Paulownia Plank 10mm White Oak 5mm MDF 10mm Black Acrylic 3mm Yellow Acrylic 5mm Red Acrylic 3mm Gray Cardboard 0.1mm Stainless Steel Plate 10mm Bamboo Packing List: 1 x Front Assembly 1 x Left Y-Axis Assembly 1 x Rear Panel Assembly 1 x X-Axis Assembly 1 x Motor Extension Shaft 1 x LB- 20A Laser Module 1 x Laser Shield 1 x Replacement Nut 1 x Lens Tool 1 x Air Assist Nozzle 1 x Replacement Lens 1 x 0 Replacement O-Ring 1 x Lens Finger Guard 1 x AlgoLaser Air pump(AAP 1.0) 1 x Air Pipe 1 x Plywood 1 x Acrylic 3 x Metal Card 17 x M4X12 Screw 1 x M2.5 Allen Key 2 x M4X16 Screw 1 x M3.0 Allen Key 1 x Machine Key Set 1 x USB Cable 2 x Coupling 1 x Power Cable 1 x Laser Goggle 1 x Power Adapter 1 x Brush SCULPFUN iCube-3W Features: ♦ 3W Ultra-fine Laser: iCube uses the 3W diode laser with 0.02mm ultra fine laser focus.

It has super fine engraving ability which can present high definition engraving image. This laser engraver is suitable for engraving detailed objects and can cut colored paper and create three-dimensional paper works. ♦ High-Speed Engraving: iCube 3W laser engraver with the 32-bit motherboard greatly improves the engraving efficiency, which can reach 10000mm/min engraving speed. ♦ With Smoke Filter: Sculpfun iCube laser engraver is equipped with the smoke filtration system that effectively filters the smoke generated during the engraving and cutting process without the enclosure, which makes it more convenient to engrave and cut in an office or home. Bringing more usage scenarios and enjoying the fun of engraving without limitation.

♦ Multiple Connection Methods: The laser engraving machine supports mobile phone and computer system connection. You can connect to iCube machine via your mobile phone with Sculpfun APP, or you can connect to the computer with the BT function or Type-C interface data cable to use. It is compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux system. ♦ Temperature Alarm Function: Built with the temperature alarm device, the machine will stop running and emit a buzzer alarm when the temperature inside the engraving machine is over 45℃ to ensure the safety of users and equipment. And when the temperature descends, restart the machine to start the work.

♦ Enclosed Eye Protection Shield: iCube portable laser engraver is designed with a detachable fully enclosed Acrylic material eye protection shield, which can effectively protect your eyes from different angles. It enables you to observe the laser engraving process without wearing the goggles. ♦ Engraving Objects without Size Limit: With the unique semi-open structure design, there is no limitation by the size of the engraving objects. You can place them inside the machine or put the machine on the surface of some large objects to perform the tasks. The patterns engraving area is 130x130mm which can meet your various engraving demands.

♦ Replaceable Laser Lens: Sculpfun iCube series adopts an innovative laser head that supports to replace the laser lens, which greatly improves the service life of the laser by more than 10 times longer than that of other general lasers. When the lens is damaged or dirtied after long-term use, it can be replaced to restore the cutting power. Specification: Fan Speed: 5000RPM Temperature Sensor: 45℃ Trigger BT: 4.2 Wi-Fi: 2.4Ghz Wavelength: 455nm Engraving Area: 130x130mm Laser Head Power: 3W Image Format: JPEG/BMP/TIF/GIF etc. Laser Spot: 0.02mm Working Voltage: 110-240V AC, 50/60Hz Working Current: 12V 5A Input Power: 60W Optimal Focusing Distance: 40mm Support System: Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux Operation Application Software: Computer: LightBurn/LaserGRBL Mobile Phone: Sculpfun APP Product Weight: 3.2KG Product Size(LWH): 262x300x226mm Package Weight: 4.75KG/10.4LB Package Size: 318x282x360mm/12.5x11.1x14.1in Some Important Tips: 1: About the Engraving Materials: Note that any specular reflective objects can not be engraved, otherwise the laser reflection will damage the laser head. 2: About the smoke filter: A free set of cotton filter is attached with purchasing, it needs to be replaced periodically to ensure the filter effect.

3: About the laser lens: A free lens is attached in the package with purchasing, which also can be ordered separately. Packing List: 1 x Laser Engraver 1 x U-Shaped Shield 1 x Metal Plate 1 x Laser Head 1 x Power Adapter 1 x Power Cable 1 x Type-C Data Cable 1 x Cotton Filter Set 1 x Lens Repair Kit 1 x Goggle 1 x Basswood Board 1 x MDF 1 x Installation Instruction Precautions: ●Because of the powerful laser, it is forbidden to run the engraving machine unattended. Please pause it if youre not around. ●Please refer to the user manual for detailed machine instructions and parameter settings. ●Please install the laser protective cover before operating the machine; if not, a pair of goggles is needed.

●Do not touch the laser with your hands, or it may burn your hands. ●Please avoid strong impact on the machine. ●Children under 14 are not allowed to use this product and children over 14 need adult supervision. ●Do not apply the laser directly to any specular reflective objects as this may cause injury to the operator or burn the laser. SCULPFUN iCube Pro-5W Features: ♦ 5W Ultra-fine Laser: iCube Pro uses the 5W diode laser with 0.06mm ultra fine laser focus.

It has strong cutting penetration and engraving precision, which can cut up to 10mm soft board, 6mm Acrylic, and engrave ceramic, stainless steel. ♦ High-Speed Engraving: iCube Pro 5W laser engraver with the 32-bit motherboard greatly improves the engraving efficiency, which can reach 10000mm/min engraving speed. ♦ With Smoke Filter: Sculpfun iCube laser engraver is equipped with the smoke filtration system that effectively filters the smoke generated during the engraving and cutting process without the enclosure, which makes it more convenient to engrave and cut in an office or home. Bringing more usage scenarios and enjoying the fun of engraving without limitation. ♦ Multiple Connection Methods: The laser engraving machine supports mobile phone and computer system connection.

You can connect to iCube machine via your mobile phone with Sculpfun APP, or you can connect to the computer with the BT function or Type-C interface data cable to use. It is compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux system. ♦ Temperature Alarm Function: Built with the temperature alarm device, the machine will stop running and emit a buzzer alarm when the temperature inside the engraving machine is over 45℃ to ensure the safety of users and equipment. And when the temperature descends, restart the machine to start the work. ♦ Enclosed Eye Protection Shield: iCube portable laser engraver is designed with a detachable fully enclosed Acrylic material eye protection shield, which can effectively protect your eyes from different angles.

It enables you to observe the laser engraving process without wearing the goggles. ♦ Engraving Objects without Size Limit: With the unique semi-open structure design, there is no limitation by the size of the engraving objects. You can place them inside the machine or put the machine on the surface of some large objects to perform the tasks. The patterns engraving area is 130x130mm which can meet your various engraving demands. ♦ Replaceable Laser Lens: Sculpfun iCube series adopts an innovative laser head that supports to replace the laser lens, which greatly improves the service life of the laser by more than 10 times longer than that of other general lasers.

When the lens is damaged or dirtied after long-term use, it can be replaced to restore the cutting power. Specification: Product Model: Sculpfun iCube Pro 5W Fan Speed: 5000RPM Temperature Sensor: 45℃ Trigger BT: 4.2 Wi-Fi: 2.4Ghz Wavelength: 455nm Engraving Area: 130x130mm Laser Head Power: 5W Image Format: JPEG/BMP/TIF/GIF etc. Laser Spot: 0.06mm Working Voltage: 110-240V AC, 50/60Hz Working Current: 12V 5A Input Power: 60W Optimal Focusing Distance: 40mm Support System: Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux Operation Application Software: Computer: LightBurn/LaserGRBL Mobile Phone: Sculpfun APP Product Weight: 3.2KG Product Size(LWH): 262x300x226mm Package Weight: 4.75KG/10.4LB Package Size: 318x282x360mm/12.5x11.1x14.1in Some Important Tips: 1: About the Engraving Materials: Note that any specular reflective objects can not be engraved, otherwise the laser reflection will damage the laser head. 2: About the smoke filter: A free set of cotton filter is attached with purchasing, it needs to be replaced periodically to ensure the filter effect. 3: About the laser lens: A free lens is attached in the package with purchasing, which also can be ordered separately.

Packing List: 1 x Laser Engraver 1 x U-Shaped Shield 1 x Metal Plate 1 x Laser Head 1 x Power Adapter 1 x Power Cable 1 x Type-C Data Cable 1 x Cotton Filter Set 1 x Lens Repair Kit 1 x Goggle 1 x Basswood Board 1 x MDF 1 x Installation Instruction Precautions: ●Because of the powerful laser, it is forbidden to run the engraving machine unattended. Please pause it if youre not around. ●Please refer to the user manual for detailed machine instructions and parameter settings. ●Please install the laser protective cover before operating the machine; if not, a pair of goggles is needed. ●Do not touch the laser with your hands, or it may burn your hands.

●Please avoid strong impact on the machine. ●Children under 14 are not allowed to use this product and children over 14 need adult supervision. ●Do not apply the laser directly to any specular reflective objects as this may cause injury to the operator or burn the laser. SCULPFUN iCube Pro Max-10W Features: ♦ 10W Powerful Cutting Laser: The iCube Pro Max uses 10W diode laser with 0.08mm laser focus. It has stronger laser performance, cutting penetration and higher working efficiency, which can engrave or cut more difficult materials and complete the laser tasks faster.

♦ High-Speed Engraving: iCube ProMax 10W laser engraver with the 32-bit motherboard greatly improves the engraving efficiency, which can reach 10000mm/min engraving speed. ♦ With Smoke Filter: Sculpfun iCube laser engraver is equipped with the smoke filtration system that effectively filters the smoke generated during the engraving and cutting process without the enclosure, which makes it more convenient to engrave and cut in an office or home. Bringing more usage scenarios and enjoying the fun of engraving without limitation. ♦ Multiple Connection Methods: The laser engraving machine supports mobile phone and computer system connection. You can connect to iCube machine via your mobile phone with Sculpfun APP, or you can connect to the computer with the BT function or Type-C interface data cable to use.

It is compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux system. ♦ Temperature Alarm Function: Built with the temperature alarm device, the machine will stop running and emit a buzzer alarm when the temperature inside the engraving machine is over 45℃ to ensure the safety of users and equipment. And when the temperature descends, restart the machine to start the work. ♦ Enclosed Eye conservation Shield: iCube portable laser engraver is designed with a detachable fully enclosed Acrylic material eye conservation shield, which can effectively protect your eyes from different angles. It enables you to observe the laser engraving process without wearing the goggles.

♦ Engraving Objects without Size Limit: With the unique semi-open structure design, there is no limitation by the size of the engraving objects. You can place them inside the machine or put the machine on the surface of some large objects to perform the tasks. The patterns engraving area is 120x120mm which can meet your various engraving demands. ♦ Replaceable Laser Lens: Sculpfun iCube series adopts an innovative laser head that supports to replace the laser lens, which greatly improves the service life of the laser by more than 10 times longer than that of other general lasers. When the lens is damaged or dirtied after long-term use, it can be replaced to restore the cutting power.

Specification: Product Model: Sculpfun iCube ProMax 10W Fan Speed: 5000RPM Temperature Sensor: 45℃ Trigger Bluetooth: 4.2 Wi-Fi: 2.4Ghz Wavelength: 455nm Engraving Area: 120x120mm Laser Head Power: 10W Image Format: JPEG/BMP/TIF/GIF etc. Laser Spot: 0.08mm Working Voltage: 110-240V AC, 50/60Hz Working Current: 12V 7A Optimal Focusing Distance: 40mm Support System: Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux Operation Application Software: Computer: LightBurn/LaserGRBL Mobile Phone: Sculpfun APP Product Weight: 3.2KG Product Size(LWH): 262*300*226mm Package Weight: 4.75KG/10.4lb Package Size: 318x282x360mm/12.5x11.1x14.1in Some Important Tips: 1: About the Engraving Materials: Note that any specular reflective objects can not be engraved, otherwise the laser reflection will damage the laser head. 2: About the smoke filter: A free set of cotton filter is attached with purchasing, it needs to be replaced periodically to ensure the filter effect. 3: About the laser lens: A free lens is attached in the package with purchasing, which also can be ordered separately. Packing List: 1 x Laser Engraver 1 x U-Shaped Shield 1 x Metal Plate 1 x Laser Head 1 x Power Adapter 1 x Power Cable 1 x Type-C Data Cable 1 x Cotton Filter Set 1 x Lens Repair Kit 1 x Goggle 1 x Basswood Board 1 x MDF 1 x Installation Instruction Precautions: ●Because of the powerful laser, it is forbidden to run the engraving machine unattended.

Please pause it if youre not around. ●Please refer to the user manual for detailed machine instructions and parameter settings. ●Please install the laser protective cover before operating the machine; if not, a pair of goggles is needed. ●Do not touch the laser with your hands, or it may burn your hands. ●Please avoid strong impact on the machine.

●Children under 14 are not allowed to use this product and children over 14 need adult supervision. ●Do not apply the laser directly to any specular reflective objects as this may cause injury to the operator or burn the laser. SCULPFUN S9-6W Features: Latest Laser Beam Shaping Technology:S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel. Fast Focusing Design:Combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete the focusing.

This makes it very easy to use. Solid & Easy Assembly Structure:The full-metal structure design makes the machine work stably, and improves the engraving accuracy. The assembly can be completed in 10-20 minutes. The structural frame is very durable and available to upgrade. During use, Wide Compatibility:The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, switch system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.

Safe Design:The laser filter cover filters 98% of the ultraviolet light to the eyes. And comes with a A4 size steel pad to protect the table from laser damage. Isolate fire hazards. 8.Square measuring ruler: X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 410x420mm large-area engraving interval can meet your various engraving needs.

Specifications: Model: SCULPFUN S9 Engraving Size: 410*420mm Engraving Materials: Wood, paper, cardboard, plastic, white, PCB board, aluminum oxide, 304 Stainless steel, ceramic, dark stone Cutting Material: Wood, acrylic, cardboard, fabric, bamboo, plastic board, KT board Machine Electricity Power: 30W (It has nothing to do with cutting or engraving performance, just electricity consumes) Diode Laser Power: 5.5-6W Laser Wave Length 455±5nm Engraving Accuracy: 0.01mm Focusing Method: Fixed focus laser + sliding device Laser Protective Cover: The light filter cover on the laser protects the users eyes and prevents animals grabing the laser spot. Operating Software: Compatible with LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, etc. Operation System: Compatible with switch system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats. Data Transmission Method: USB connection Power Supply: International universal standard power input: 100-240V AC, 50/60HZ output: 12V 5A Machine Weight: 3.0kg/ 6.61lbs Package Weight: 4.4kg/ 9.7lbs Package Size: 59 x 34 x 12cm/23.3 x 13.3 x 4.7in Note: ● For detailed machine instructions, please refer to the manual for parameter settings.

● When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. ● Please do not touch the laser emitter with your hand, or it may burn your hand. ● Please avoid strong impact on the machine. ● Children under 14 are not allowed to use this product and children over 14 need adult supervision.

● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. Package List: 1× X axis assembly 2× X shaft 2× Y shaft 2 x Belt 1× Control box module set 3× Support feet 1× Laser module set 1× Power Supply 1× USB cable 1× Tool Kit 1× Goggles 1× 10x10cm wood chip 3mm thickness 1× 10x10cm wood chip 10mm thickness 1× A4 size steel desktop conservation pad SCULPFUN S10-10W Features: 10W laser Beam Shaping Technology:The S10 laser output power is increased to 10W, which is twice that of the S9. But S10 obtains the same ultra-thin laser beam with 0.08mm focus as S9, which means S10 has higher energy density, stronger cutting penetration and engraving capabilities. Powerful High-speed Air Assist:Equipped with a high-speed air assist nozzle. Advanced fluid mechanics design to better utilize the air pressure.

When using the same air compressor, the S10 spray airflow faster. For example, when using 30L/min, 0.03Mpa air compressor, the S10 nozzle will spray high-speed airflow up to 14.5m/s. This will greatly improve the cutting penetration and cutting efficiency. Industrial-grade Cutting Accuracy:S10 adopts industrial high-precision linear slide rail X-axis, which makes it get industrial-grade engraving accuracy. When comparing the small engraving details, S10 does not have the wave lines that other ordinary engraving machines appear.

More Advanced and Upgradable 32-bit Motherboard:The S10 motherboard uses 32-bit chips, with faster computing speed, and it still reserves Z-axis and limit switch functions to facilitate people to upgrade the engraving machine. It still perfectly supports laser cutting software like Lightburn and LaserGRBL. Square Measuring Ruler:X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 400x400mm large-area engraving interval can meet your various engraving needs. Detachable Laser Shield & Safe Design:Equipped with a detachable eye shield, which will not dazzle even without glasses.

And if you dont need it, you can easily disassemble the eye shield. There is a very safe and eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency. The all-metal body makes the machine very sturdy and durable. And the free A4 size steel pad can protect the table from laser damage, isolate fire hazards. Specification: Model: S10 Diode Laser Output Power: 10W (Note This Is Light Energy Not Electrical Energy) Inner Diameter Of Air Pipe: 7.5mm (Recommended To Use 30L/Min, 0.03mpa Air Compressor, Out Diameter Of Nozzle: 8mm) Laser Wavelength: 455±5nm Engraving Accuracy: 0.01mm Engraving Area Size: 410x400mm Focusing Method: Fixed Focus + Sliding Device Laser conservation Cover: Equipped With a Detachable Laser Cover To Protect The Eyes.

You Can Adjust It Up And Down, Or Remove The Cover Machine Power Consumption: About 36W (Not Related To Engraving Or Cutting Performance, Just Power Consumption) Engraving/Cutting Materials: Engraving Material: All Kinds Of Wood (Including Walnut, Cherry And Other High Density Wood), MDF, Bamboo, Cardboard, Plastic, Leather, PCB Board, Alumina, 304 Stainless Steel, Ceramic, Dark Stone Cutting Material: All Kinds Of Wood (Including Walnut, Cherry And Other High-Density Wood), MDF, Acrylic, Cardboard, Bamboo, Some Plastic Boards, Leather, PCB Boards Laser Software: LASERGRBL, LIGHTBURN, LASERGRBL, LIGHTBURN, BENBOX, GRBLCONTROLLER, LITEFIRE Support System: Support MAC, Windows System Supported File Formats: NC, BMP, JPG, PNG, DXF And Other Image Formats Data Transfer Method: USB Connection Power Input: 100-240V AC, 50/60hz; Output: 12V 5A Product Weight: 3.42kg Packing Weight: 5.13kg/11.3lb Packing Size: 600 x 345 x 130mm/23.6 x 13.6 x 5.1in Notes: ●Because of the powerful laser of S10, it is forbidden to run the engraving machine unattended. Pause it if youre not around. ●For detailed machine instructions, please refer to the manual for parameter settings. ●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles. ●Do not touch the laser with your hands, otherwise you may burn your hands.

●Please avoid strong impact on the machine. ●It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended. ●Do not use the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser. Packing List: 1 x X-Axis Assembly 2 x X Profiles 2 x Y Profiles 1 x Control Box Assembly 3 x Support Feet 1 x S10 Laser 1 x 12V 5A Power Adapter 1 x Power Cord 1 x USB Cable 1 x Air Tube 3 x Tool Bag 1 x Laser Goggles 1 x Test Wood Board 1 x A4 Size Metal Pad Step 1-6 Install The Package 1 x User Manual SCULPFUN S30 PRO MAX-20W Features: ▶ Upgraded Laser Engraving with Air Assist System: The S30 series is equipped with an airassist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and is very suitable for the manufacture of exquisite gifts. ▶ Excellent Engraving Performance: S30 PRO MAX 20W laser pursues the ultimate cutting speed, suitable for professionals, shops or factory; It can cut 15mm balsa wood and 10cm plywood at one time.

And making it reach industrial-grade engraving accuracy with extremely solid and high-precision linear slide rail X-axis, no e wavy pattern in carving small items. 410*400mm large-area engraving range can meet your various engraving needs. ▶ Built-in high pressure air assist nozzle: S30 series is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean. ▶ Replaceable protective lens: Adopts innovative replaceable lens, greatly improves the service life of the laser, which is more than 10 times longer than other general lasers.

When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power. A free lens is included with the purchase, more lens can be easily purchased from SCULPFUN. ▶ Eye conservation and Safety Design: Equipped with a detachable eye shield, which will not dazzle even without glasses. If you dont need it, you can easily disassemble it. The presented A4 size steel pad can well protect the table from laser damage.

Isolate fire hazards. There is a very safe and eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency. ▶ Sturdy and Durable Frame: The S30 series is made of high-strength aluminum alloy, its frame can bear up to 50KG weight without damage, and is very durable. The frame can be used for a long time and maintain high precision, only need to upgrade the latest laser when the machine needs to be upgraded. ▶ Innovative XY Axis Expandable Design: you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade Up to 935x905mm engraving area to better handle large engraving or cutting work.

And there are precise scale lines on the X-axis and Y-axis which is convenient for you to quickly measure the size of the engraved object. Specification: Model: SCULPFUN S30 PRO MAX Power Input: 100-240V AC, 50/60HZ Output: 24V 5A Engraving accuracy: 0.005mm Engraving area size: 410*400mm Machine power: about 120W Diode laser output power: 20W (note that this is light energy not electrical energy) Laser focus: 0.08x0.1mm Laser wavelength 455±5nm Focusing method: fixed focus column + sliding device Laser conservation cover: Equipped with a detachable laser conservation cover to protect the eyes. You can adjust it up and down, or remove the goggles. Air pump: Type: mainboard-controlled air pump, voltage 24V, flow 30L/min Air hose inner diameter: 7.5mm Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone Cutting material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards Operating software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.

Data transmission method: USB connection or BT wireless connection Package Size: 62.3x24x22.5cm/24.5x9.4x8.8in Package Weight: 7530g/16.6lb Precautions: ●Because of the powerful laser power, it is forbidden to run the engraving machine without being supervised. Pause it if youre not around. ●For detailed machine instructions, please refer to the manual for parameter settings. ●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles. ●Do not touch the laser with your hands, otherwise you may burn your hands.

●Please avoid strong impact on the machine. ●It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision. ●Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser. Packing List: 1 x S30 Po Max laser 1 x Laser Repair Kit 1 x 24V automatic air pump 3 x A4 size 3mm wooden board 2 x Limit Switch 1 x 24V 5A power adapter 1 x power cord 1 x USB cable 1 x Air tube 1 x Installation tool Kit 1 x Laser Goggles 1 x A4 metal backing plate Step 1-6 Install the package 1 x Manual 1 x X-axis assembly 2 x X profiles 2 x Y profiles 1 x Control Box Assembly 3 x support feet SCULPFUN S30 Ultra-33W Features: 🔝 600x600mm engraving area: large work area makes many of your works not limited by the area, and you can produce most of the large-scale cutting works. In addition, the 600x600mm area is very sufficient, and the service life is extremely long, and there is almost no need to upgrade the structure in future use.

🔝 Professional safety design: S30 Ultra series is equipped with emergency stop switch and safety child lock. In an emergency, tapping the emergency stop switch can stop the machine; The machine cannot be turned on once pull out the key, which can prevent children from turning it on by mistake. 🔝 One series One structure, easy to upgrade: S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure, and laser cable are all the same. In future upgrades, 11W- 22W-33W you only need to replace the laser head without any other changes. 🔝 Tool box, laser repair box, fixed-focus column holder: S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc., all of which are conveniently stored in boxes.

In addition, a professional fixed-focus column storage box is provided on the machine, which is convenient for storing the fixed-focus column. 🔝 Enhanced 42-bit stepping motor: Enhanced 42-bit stepping motor provides sufficient power to make the machine move at high speed. The torque reaches 4.2 Kg·cm (ordinary machines are 3.1 Kg·cm). In future upgrades, even if the laser or the load becomes heavier, there is no need to replace the motor. 🔝 Replaceable protective lens: S30 Ultra series laser adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers.

When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power. One free lens is included in the package with purchase, lenses are very cheap and can be easily purchased from SCULPFUN. 🔝 Built-in high-pressure air-assisted nozzle: S30 Ultra series is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean. 🔝 Upgraded 32-bit air-assisted motherboard: the latest 32-bit motherboard supports automatic air-assisted control function, supports wireless BT connection to control the machine, and is not limited by the distance of the USB cable.

🔝 Industrial-grade cutting precision: S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines. 🔝 Detachable laser eye shield: S30 series is equipped with a detachable glass eye shield, which will not be dazzling even if you dont wear glasses. Plus you can easily disassemble it if you dont need it. 🔝 Solid and durable frame: The S30 series is made of high-strength aluminum alloy, and its frame can withstand a weight of up to 50KG without damage, which is very durable.

The frame can be used for a long time and maintain high precision, when the machine needs to be upgraded, only the latest laser needs to be upgraded. Specification: Product model: SCULPFUN S30 Ultra-33W Laser information: Diode laser output power: 33W (note that this is light energy not electrical energy) Laser focus: 0.08x0.08mm Laser wavelength 455±5nm Focusing method: fixed focus column + sliding device Laser protective cover: Equipped with a detachable laser protective cover to protect the eyes. You can adjust it up and down, or remove the eye shield. Machine information: Engraving accuracy: 0.005mm Engraving area size: standard version is 600x600mm Machine electric power: about 156W Air pump: Type: main board controlled air pump, voltage 24V, flow rate 30L/min Air hose inner diameter: 7.5mm Motherboard: 32-bit air-assisted motherboard, supports BT wireless connection. Machine Size External Size: 800*840mm (Include the Motherboard Shell and X-axis Gantry Beam) 750*800mm（Beam Frame） Internal Size: 700*760mm (Inner Frame Size) 600*600mm (Working Area) Height: 80mm（Beam Frame） 220mm（Include X-axis Gantry Beam） Note: Due to manual measurement, please allow some variations.

Engravable/cutting material: Carving materials: all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, stone, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramics, dark stone Cutting materials: all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo chips, leather, some plastic boards, PCB boards Operating software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, Operating System: Windows, MAC OS. File Formats: NC, BMP, JPG, PNG, DXF and other picture formats. Data transmission method: USB connection or BT wireless connection Power input: 100-240V AC, 50/60HZ Output: 24V 7A Package weight: 9.9kg/21.8lbs Packing size: 865x247x235mm/34x9.7x9.2in Packing List: 1 × S30 Ultra-33W laser 1 × laser shield 1 × Laser Repair Kit 1 × 24V automatic air pump 2 × 460*230*3mm wood board 2 × 460*230 protective aluminum plate 2 × limit switch 1 × 24V 7A power adapter 1 x power cord 1 ×USB cable 1 × rubber air hose 1 × tool box 1 × laser goggles Step 1-6 installation package 1 × instruction manual 1 × X-axis assembly 2 x X-profiles 2 x Y profile 1 × control box assembly 3 × support feet 1 x cable clamp bag 1 x fixed focus column mount 1 x spare screw pack 1 x Non-slip seat Pack SCULPFUN SF-A9-40W Features: 🔝 40W Powerful Laser: SF-A9 adopts the 40W laser head with a strong cutting ability, and supports the 40W/20W laser power switching, which can cut 20mm plywood and 6mm dark acrylic at one pass time. It uses the heat pipe radiator to provide a faster and more balanced heat dissipation performance. 🔝 Safety conservation Design: Built with a tilt sensor, it will set off an alarm and stop emitting the laser light while the machine body is off-balance and tilts over 15°.

It is also equipped with the functions of emergency stop and child safety lock switches, flame and temperature sensors. When it detects the flames during the working process, the flame and temperature sensors will be triggered and the machine will stop working with an alarm while automatically moves to the safest location. 🔝 36000mm/min High Speed: The SF-A9 laser engraving machine supports the high speed engraving mode with a faster working speed of up to 36000mm/min as well as a stable machine body to bring a perfect engraving effect. And it supports precision mode to cut more accurately for a better components assembly. 🔝 Precise Focusing Design: Designed with a most precise focusing, the focus lever on the laser head is stable that enables the focusing position more accurate.

The red knob on the right side of the laser is to raise or lower the laser module for the quick height positioning according to the materials thickness, and the knob on the top of the laser is for the precise adjustment. 🔝 Sturdy and Easy Installation: Full metal structure design makes the machine robust. The levelling structure of the metal support pillar and the industrial-grade linear guide rail of the X-axis provide more stability to the machine, which increases the engraving motion accuracy to 0.01mm. Y-axis utilizes adaptive wheels to provide a more smooth motion. Easy installation in one step to complete the entire assembly.

🔝 Adjustable Machine Height: The Sculpfun SF-A9 comes with the additional metal support pillars that can adjust the height of the machine to facilitate the engraving of higher objects, meeting a variety of working needs. 🔝 Multiple Connection Methods: Supports WiFi, USB and BT function. It can be compatible with the Sculpfun mobile phone APP or the computer software like LightBurn and LaserGRBL. 🔝 Automatic Air Assist: Upgraded large inner diameter air pipe with a better air channel design that can present a cleaner cutting effect and improve the service life of the laser lens. Specification: Product Model: Sculpfun SF-A9 Flame Alarm: 60℃ trigger Tilt Sensor: 15° trigger BT: 4.2 Wi-Fi：2.4Ghz Wavelength: 450nm±5nm Working Area: 400*400mm Laser Module Power: 40W Laser Spot: Adjustable:0.1mm/0.15mm Working Speed:MAX.36000mm/min Working Voltage: DC24V Working Current: 10A Input Power: 240W Support System: Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux Material for Engraving:Cardboard, MDF, Felt, Cardboard, Wood, Bamboo, Leather, Fabric, Dark Acrylic, Brushed Stainless Steel, Dark Anodized Aluminum, Painted Metal, etc Material for Cutting: Cardboard, MDF, Felt, Cardboard, Wood, Bamboo, Leather, Fabric, Dark Acrylic, etc.

Operation Application Software: Computer: LightBurn/LaserGRBL Mobile Phone: Sculpfun APP Package Weight: 11.2kg/24.69lb Package Size: 715x665x150mm/28.1x26.1x5.9in Packing List: 1 x Laser Machine 1 x Laser Head 1 x Adapter 1 x Power Cable 4 x Metal Support Pillar 4 x Spare Metal Support Pillar 1 x Data Cable 1 x Air Pump 1 x Goggles 1 x Lens Repair Kit 1 x Tool Set 1 x Cable Tie Pack 1 x Antenna Pack 1 x Screw Kit 1 x Aluminium Plate 2 x Basswood Board 2 x Key Precautions: ●Because of the powerful laser, it is forbidden to run the engraving machine unattended. Please pause it if youre not around. ●Please refer to the user manual for detailed machine instructions and parameter settings. ●When operating the laser engraving machine, please wear goggles. ●Do not touch the laser with your hands, or it may burn your hands.

●Please avoid strong impact on the machine. ●Children under 14 are not allowed to use this product and children over 14 need adult supervision. ●Do not apply the laser directly to any specular reflective objects as this may cause injury to the operator or burn the laser. ATOMSTACK P7-5.5W Features： Newly Upgraded Ultra-fine Compression Laser:the laser adopts 4-fold lens group collimation and focus technology, the optical power is 4.5~5.5W, the laser focus area is reduced to 0.02mm², the high-density laser can easily cut 10mm thick wood boards and 6-8mm black acrylic ; Can directly engrave mirror stainless steel metal and ceramics. Upgraded Version of High-performance Fixed-focus Laser:Engraving can be done without adjusting the focal length; the newly upgraded compressed spot increases the energy concentration by 200%, and the spot size is only 0.02mm², which can take into account both precision engraving and high-energy cutting.

At the same time, the laser power of fixed-focus laser is more stable than that of zoom laser. Easy Installation: The all-aluminum alloy anodized structure design makes the machine more durable and improves the accuracy of engraving. The portable all-metal structure, 85% pre-assembly, can be installed in 5 minutes. Eye-protection Flame-retardant Filter Panoramic :The flame-retardant filter panoramic can filter 97% of the ultraviolet light, which plays a very good role in protecting your eyes. You and the people around you do not need to wear goggles, you can also clearly Watch laser engraving.

Reduce the cost of your goggles and the inconvenience of wearing goggles. The is flame retardant and safer to use. More Humanized & Safe Design: ith knob for easier to adjust the height of the laser and a horizontal gyroscope auto stop working when it is tilted. Wide Compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. Specifications: Model:ATOMSTACK P7 M40 Frame Material:Aluminum alloy Input Voltage:AC100-240V, 50/60Hz Output Voltage:DC12V, 3A Engraving Size:Recommend Print Size 200*200mm Engraving Materials:wood, bamboo, cardboard, plastic, leather, MDF, slate, lacquered metal, mirror stainless steel; Cutting Material:cardboard, non-woven fabric, veneer, acrylic, some thin plastic board, sponge, MDF, leather; Spot Size:0.02㎡ Laser Power:40W Laser Output power:4.5-5.5W Wave Length:445 ± 5nm Engraving Accuracy:0.01mm Focusing Method:fixed focus laser, no need to focus Laser Protective Cover:Protect the users eyes and prevent pets from grabbing the laser spot.

Operating Software:Compatible wiith LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Input Format:NC, BMP, JPG, PNG, DXF, etc. Data transmission Method:USB connection. Machine Size:382*420*146mm/ 15*16.5*5.7n Machine Weight:3kg/ 6.6lb Package Size:490*275*135mm/ 19.2*10.8*0.5in Package Weight:4656g/164.2oz Packing List: Assembly block*4 Laser Module*1 Laser Slide*1 Foot Pad Foam*4 USB Cable*1 Open Wrench*1 Y-axis Belt Assembly*1 Marker *1 Cable Tie*5 Screw*4 Hexagonal Wrench*2 Wood Chips*3 Fixed Focus Film*1 Acrylic Sheet*3 Cutting Pad *1 Lower Support Foot*1 Upper Support Foot*1 Control Box*1 X Axis Assembly*1 Y Axis Assembly*1 Power Adapter*1 Power Cord*1 Note: When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.

Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. ATOMSTACK A5 V2-6W Features: ♦ High Speed Laser Engraver: Engraving speed is increased by 2 times: using the latest technology, it can realize 24000mm/min high-speed engraving, and the speed is increased by 2 times.

Whether you are a manufacturing industry or an individual user, our products can meet your needs, improve work efficiency and shorten production time. 400x400mm large working area provides boundless creative space. ♦ New structure: The linear slide rail + tank chain design enhances the structural accuracy and optimizes the wiring harness arrangement, thereby improving the accuracy and stability of the product. This design can also reduce the noise and vibration of the machine, providing a better working environment. ♦ High Accuracy: New 50mm long focal length light source, leading cutting ability.

Not only can the cutting efficiency be improved, but also the cutting quality and precision can be enhanced. ♦ New Focusing Device: Adjust the focal length more accurate: equipped with a new focusing device, you can adjust the focal length more accurate. This design can not only improve the cutting quality, but also make the cutting easier and more convenient. In addition, our focusing devices can be adapted to different thicknesses of materials. ♦ The second-generation APP control: Adopts the second-generation APP control, including cutting model material library, rich design functions and stable connection control.

This design allows users to operate the laser cutting machine more conveniently, improving work efficiency and cutting quality. ♦ Upgraded Dual Compression Spot Coupling Technology: The ultra-fine laser focus area is reduced to 0.05*0.05mm, and the high-density laser can easily cut 10mm balsa wood, 10mm paulownia wood, 5mm basswood plywood and 12mm thick black acrylic; it can directly engrave mirror stainless steel metal , ceramics, glass, etc., the engraving & cutting speed is 40% higher than that of the non-spot compression model, which is comparable to the effect of a 90W CO₂ laser engraving machine. ♦ Excellent 6W Engraving and Cutting Ability: Suitable for a variety of material processing: suitable for carving wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slat and other materials. ♦ Extensive Compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, supports Win XP / Win 7 / Win 8 / XP / Win 10, and also supports MAc system (LightBurn), engraving file format Support NC, BMP, JPG, PNG, DXF, etc. ♦ Integral Screw: The machine uses an integral screw instead of a combined shaft connector, the stepper motor and the screw are integrated, which makes the laser movement more accurate and the coupling more durable.

♦ Safety Protection: The new panoramic filter protective cover can protect your eyes very well, filtering 97% of ultraviolet light, you and the people around you can watch the laser without wearing goggles Sculpture. Reduce your goggle expense and inconvenience of wearing goggles. ♦ Strong Expandability: You can choose to add a type of protective box, rotating shaft accessories, purifiers, extension shafts, cameras, cross laser positioning, flame detection modules, horizontal gyroscopes and other accessories are optional (purchase separately). Specification: Product model: ATOMSTACK Maker A5 V2 Engraving size: 400*400mm Laser power: 40W Laser output optical power: 5.5-6W Laser wavelength: 455±5nm Engraving accuracy: 0.01mm Focusing method: fixed focus, no need to focus Laser focus: 0.05*0.05mm Product material: circuit board V/PWM modulation board Wire: 22#2P2.54 terminal reverse wire 80mm Optical lens: φ6/glass Fan: 12V Laser Beam Mode: Spot Working mode: pulse work Spot size: 0.05*0.05mm Working time: 10000H Working temperature: 0℃~70℃ Storage temperature: -40℃~85℃ Sintering temperature: 800°C Carving material: Basswood pine paulownia, plywood, yellow peach, mahogany, bamboo, kraft paper, plastic, leather, PCB board, aluminum oxide, non-reflective electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, rock plate, Density board, kraft paper, non-transparent acrylic board, resin, artificial bovine bone, rubber, high-density foam board, oil painting paper, A4 paper, leaves, etc. Cutting material: Kraft paper, non-woven fabric, hardwood, paulownia, basswood, pine, less than 2MM bamboo, cork, low-density foam board, non-transparent acrylic, less than 2MM thick ABS, PP and other plastic sheets, sponge, etc.

Laser protective cover: there is a protective cover on the laser to protect the users eyes, no need to wear additional protective glasses. At the same time prevent pets from grabbing the laser point Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10 system Supported file formats NC, BMP, JPG, PNG, DXF, Data transmission method: USB connection Power supply: 100-240V AC, 50/60HZ Output: 12V 5A Machine Size: 641*565*218mm/25.5x22.2x8.5in (L*W*H) Machine Weight: 4KG Package Size: 59 x 38 x 16.5cm/23.2x14.9x6.4in Package Weight: 6230g/13.7lb Precautions: ●Before operating the laser engraving machine, please read the manual carefully. ●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles. ●Do not touch the laser with your hands, or you may burn your hands. ●Please avoid strong impact on the machine.

●Children under the age of 14 are prohibited from using this product, and children over the age of 14 need adult supervision. ●Do not apply the laser directly to any specular reflective objects, which may cause injury to the operator or burn the laser. ●Transparent acrylic cannot be engraved directly. Packing List: 1 x ATOMSTACK Maker A5 V2 Laser Engraver 1 x Mounting screw 1 x tool bag 4 x foot pad foam 3 x acrylic sheet 3 x wood chips 10 x wire tie 1 x desiccant 1 x brush 1 x clean cloth 1 x power adapter 1 x glasses 1 x manual 1x data cable 1 x laser module 1 x X-axis assembly 1 x Y axis left profile 1 x Y axis right profile 1 x profile on the base 1 x Base lower profile 3 x foot bracket ATOMSTACK A10 V2-12W Features: ♦ High Speed Laser Engraver: Engraving speed is increased by 2 times: using the latest technology, it can realize 24000mm/min high-speed engraving, and the speed is increased by 2 times. Whether you are a manufacturing industry or an individual user, our products can meet your needs, improve work efficiency and shorten production time.

400x400mm large working area provides boundless creative space. ♦ New structure: The linear slide rail + tank chain design enhances the structural accuracy and optimizes the wiring harness arrangement, thereby improving the accuracy and stability of the product. This design can also reduce the noise and vibration of the machine, providing a better working environment. ♦ High Accuracy: New 50mm long focal length light source, leading cutting ability. Not only can the cutting efficiency be improved, but also the cutting quality and precision can be enhanced.

♦ New Focusing Device: Adjust the focal length more accurate: equipped with a new focusing device, you can adjust the focal length more accurate. This design can not only improve the cutting quality, but also make the cutting easier and more convenient. In addition, our focusing devices can be adapted to different thicknesses of materials. ♦ The second-generation APP control: Adopts the second-generation APP control, including cutting model material library, rich design functions and stable connection control. This design allows users to operate the laser cutting machine more conveniently, improving work efficiency and cutting quality.

♦ Upgraded dual compression spot coupling technology: the ultra-fine laser focus area is reduced to 0.06*0.06mm, and the high-density laser can easily cut 18mm balsa wood, 13mm paulownia wood, 6mm basswood plywood and 15mm thick black acrylic; it can directly engrave mirror stainless steel, ceramics, glass, etc., the engraving & cutting speed is 40% higher than that of the non-spot compression model, which is comparable to the effect of a 150W CO₂ laser engraving machine. ♦ Excellent Engraving and Cutting Ability: 10-12W laser power. Great for carving basswood pine paulownia, plywood, yellow peach, aluminum oxide, non-reflective electroplated and painted metal, 304 mirror stainless steel, glass, ceramics; And cutting cork, low-density foam board, non-transparent acrylic and so on. ♦ Extensive Compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, supports Win XP / Win 7 / Win 8 / XP / Win 10, and also supports MAc system (LightBurn), engraving file format Support NC, BMP, JPG, PNG, DXF, etc. ♦ Safety Protection: The new panoramic filter protective cover can protect your eyes very well, filtering 97% of ultraviolet light, you and the people around you can watch the laser without wearing goggles Sculpture.

Reduce your goggle expense and inconvenience of wearing goggles. ♦ Strong Expandability: You can choose to add a type of protective box, rotating shaft accessories, purifiers, extension shafts, cameras, cross laser positioning, flame detection modules, horizontal gyroscopes and other accessories are optional (purchase separately). Specification: Product model: ATOMSTACK Maker A10 V2 Engraving size: 400*400mm Laser power: 50W Laser output optical power: 10-12W Laser wavelength: 455±5nm Engraving accuracy: 0.01mm Focusing method: fixed focus laser, no focusing Laser focus: 0.05*0.05mm Product material: circuit board V/PWM modulation board Wire: 22#2P2.54 terminal reverse wire 80mm Optical lens: φ6/glass Fan: 12V Laser Beam Mode: Spot Working mode: pulse work Spot size: 0.05*0.05mm Working time: 10000H Working temperature: 0℃~70℃ Storage temperature: -40℃~85℃ Sintering temperature: 800°C Engravable/cuttable materials Carving material: Basswood pine paulownia, plywood, yellow peach, mahogany, bamboo, kraft paper, plastic, leather, PCB board, aluminum oxide, non-reflective electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, rock plate, Density board, kraft paper, non-transparent acrylic board, resin, artificial bovine bone, rubber, high-density foam board, oil painting paper, A4 paper, leaves, etc. Cutting material: Kraft paper, non-woven fabric, hardwood, paulownia, basswood, pine, less than 2MM bamboo, cork, low-density foam board, non-transparent acrylic, less than 2MM thick ABS, PP and other plastic sheets, sponge, etc. Laser protective cover: there is a protective cover on the laser to protect the users eyes, no need to wear additional protective glasses.

At the same time prevent pets from grabbing the laser point Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system Supported file formats NC, BMP, JPG, PNG, DXF, Data transmission method: USB connection Power supply: 100-240V AC, 50/60HZ Output: 12V 5A Machine Size: 641*565*218mm/25.5x22.2x8.5in (L*W*H) Machine Weight: 4KG Package Size: 59 x 38 x 16.5cm/23.2x14.9x6.4in Package Weight: 6400g/14.1lb Packing List: 1 x ATOMSTACK Maker A10 V2 Laser Engraver 1 x Mounting screw 1 x tool bag 4 x foot pad foam 3 x acrylic sheet 3 x wood chips 10 x wire tie 1 x desiccant 1 x brush 1 x clean cloth 1 x power adapter 1 x glasses 1 x manual 1x data cable 1 x laser module 1 x X-axis assembly 1 x Y axis left profile 1 x Y axis right profile 1 x profile on the base 1 x Base lower profile 3 x foot bracket ATOMSTACK S30 PRO-33W Features: ♦ Super High Power: The worlds first 33W optical power laser engraving machine. With the latest six 6W laser coupling technology, it can cut 18-20mm paulownia board, 10mm black acrylic board, and even 0.1mm stainless steel sheet at one time. The high-density laser can easily cut 30mm thick wood and 40mm thick black acrylic with multiple operations; it can directly engrave mirror stainless steel, ceramics, opaque glass and other materials. ♦ Upgraded 32-Bit Air-Assisted Motherboard: Equipped with self-developed 32-bit motherboard which built-in 256-bit color scale, achieving the finer engraving result and higher contrast effect. Use with F30 Pro upgraded air assist kit as standard, while the cutting ability has been greatly improved, the cutting accuracy and cutting quality can also be greatly optimized.

♦ High work efficiency: Compared with 10W laser engraving machine, the cutting speed is increased by 200%, and the cutting depth is increased by 150%. Compared with 20W laser engraving machine, the cutting speed is increased by 50%, and the cutting depth is increased by 25%. ♦ Upgraded Fixed-focus Laser Module: it can be engraved without focus adjustment; the 0.08*0.1mm focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers, which can take into account both precision engraving and high-energy cutting. At the same time, the laser power of the fixed-focus laser is more stable than that of the zoom laser. Design with a knob that convenient and quick to adjust the height of the laser.

♦ Strong Compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAC system (LightBurn), self-developed mobile phone APP is now available in major Android application markets and Apple APPstore (The APP is downloadable via scanning the QR code from the manual as well). Mini size and multi-function, bringing you a fresh control experience, come and have a try! ♦ Eye Protection: The panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, without the goggle, you can also watch laser engraving. Save money and reduce the inconvenience of wearing goggles. ♦ Solid and Easy Installation Structure Design: The all-aluminum alloy anodized structure design makes the machine more durable, and improves the accuracy of engraving.

The entire structure has been designed for quick assembly, and the assembly can generally be completed within 20-30 minutes. ♦ Excellent Design: The machine uses an integrated screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the movement of the laser more precise and the coupling more durable. The laser sintering temperature is up to 3000℃. There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement.

400x400mm large area engraving interval can meet your various engraving needs. Specification: Item model: ATOMSTACK S30 PRO Engraving size: 400*400mm Engraving material: Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate; Cutting material: Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge; Machine Electric Power: 160W Laser Power: 120W Laser output power: 33-36W Wave Length: 445 ± 5nm Engraving accuracy: 0.01mm Focusing method: fixed focus laser, no need to focus Laser protective cover: Protect the users eyes and prevent pets from grabbing the laser spot. Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Input Format: NC, BMP, JPG, PNG, DXF, etc. Data transmission method: USB connection.

Input Voltage: AC100-240V, 50/60Hz Output Voltage: DC12V, 6A Package Size: 57x52x18cm/22.4x20.4x7in Package Weight: 11500g/25.3lb Packing List: 1×mounting screw 1×tool kit 4×foot pad foam 1×film 3×acrylic sheet 3×wood chips 10×wire tie 1×desiccant 1×brush 1×clean cloth 1×card reader 1×TF card 1×power adapter 1×instruction 1×data line 1×touch screen components 1×HDMI cable 1×laser module 1×cutting pad 1×X axis assembly 1×Y axis left profile 1×Y axis right profile 1×upper profile 1×lower profile 3×foot bracket ATOMSTACK S40 Pro-40W Features: High power: ATOMSTACK S40 Pro, as the most cutting-edge laser engraving machine, has the highest 40W optical power in the industry, which is suitable for professional work and greatly improves work efficiency. It can cut through 18mm basswood, pine and paulownia at one time, and 9mm The MDF density board can cut through 0.1mm stainless steel sheet at one time. Switch the engraving/cutting mode with one key: ATOMSTACK S40 Pro adopts a brand-new laser design, which can switch between 20W and 40W output power with one key through the physical button, and open different modes for different tasks of engraving and cutting. Strong output. New motion structure: Different from Atomstacks previous machines, Atomstack S40Pro adopts a more stable linear guide X-axis, which makes S40Pro work stably at a high speed of 600mm/s, and the engraving and cutting lines are smooth without shaking.

Tank chain harness: In order to make the machine more beautiful and the structure more stable, Atomstack S40Pro adopts a tank chain wire harness solution that is not available in other models. The wire harness runs smoothly without entanglement and improves the life of the wire. Professional cutting machine: adopt the most stable 40W high optical power laser module at present. The latest 8 6W laser coupling technology, the peak power can be as high as 48W, can cut 20mm basswood, 25mm pine and paulownia, 12mm MDF density board. Standard automatic switch air assist kit: standard F30Pro high-flow air assist, you can turn on the lightburn M7 mode to realize automatic switch air assist in different modes of cutting/engraving.

While the cutting ability has been greatly improved, the cutting accuracy and cutting quality can also be greatly optimized, making Atomstack S40Pro a real professional laser cutting machine. Upgrade Atomstacks self-developed 32-bit motherboard: built-in 256-bit color scale map, which makes the engraving work more delicate and has higher contrast, so that your engraving is not only black. New non-blocking laser: The new S40 laser has a built-in tool-free focusing module, and a built-in air assist system, without the interference of wires, simple and beautiful. The patented double-layer wind gathering cover design can ensure that the laser will not be blocked and the lens will not be polluted for a long time, which greatly improves the life of the laser. Atomstacks self-developed mobile phone APP: Atomstacks self-developed mobile phone APP is now available in major Android application markets or APP store (you can also scan the QR code of the manual to download).

It is small and multi-functional, bringing a new control experience. Come on, give it a try. Brand-new filter panoramic glass eye conservation design: the panoramic filter glass protective cover can protect your eyes very well, filtering 97% of ultraviolet light, you and the people around you can watch without wearing goggles Laser engraving. Reduce your goggle expense and inconvenience of wearing goggles. Sturdy and easy-to-install structural design: The all-aluminum anodized structural design makes the machine more durable and improves the engraving accuracy.

The whole structure has been designed for quick installation, and the installation can be completed in generally 20-30 minutes. Wide compatibility: the machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, supports Win XP / Win 7 / Win 8 / XP / Win 10, also supports MAc system (LightBurn), engraving file format Support NC, BMP, JPG, PNG, DXF, etc. Upgraded compressed spot coupling technology: ultra-fine laser focus area reduced to 0.1*0.1mm, high-density laser can easily cut thick wood, black acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, engraving & cutting speed is higher than 30W 40%, comparable to the cutting effect of 80W CO₂ laser engraving machine. Integral screw: The machine uses an integral screw instead of a combined shaft coupling. The stepping motor and the screw are integral, which makes the movement of the laser more precise and the coupling more durable.

Safety conservation: Equipped with an emergency stop button, if there is an unexpected situation, the machine can be stopped at any time, and it is equipped with a reset switch and a limit switch to engrave more safely Specification: Model: S40 pro Engraving size: 400*400mm Engravable/cuttable materials Carving material: wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective Electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate; Cutting materials: cardboard, non-woven fabrics, wood, plywood, acrylic (transparency needs to be painted black), some thin plastic plates, sponge, metal sheets such as aluminum and stainless steel; Machine power: 210W Laser power: 180W (in cutting mode) Laser output optical power: 40-48W Laser wavelength: 455±5nm Engraving precision: 0.01mm Focusing method: fixed focus laser, no focusing Laser protective cover: there is a protective cover on the laser to protect the users eyes, no need to wear additional protective glasses. At the same time prevent pets from grabbing the laser point Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system Supported file formats: NC, BMP, JPG, PNG, DXF, Data transmission method: USB connection Package Size: 595x545x385mm/23.4x21.4x15.1in Package Weight: 11.2kg/24.6lb Packing List: 1 x linear guide X-axis assembly 1 x profile on the base 1 x Base lower profile 1 x laser module 2 x tank chain 1 x F30Pro dual pump air assist 1 x Mounting screw 1 x tool bag 4 x foam pads 1 x fixed focus film 3 x acrylic sheet 3 x wood chips 10 x wire tie 1 x desiccant 1 x clean brush 1 x clean cloth 1 x card reader 1 x TF card 1 x power adapter 1 x manual 1 x data cable 1 x Y axis left profile 1 x Y axis right profile 3 x foot bracket 1 x goggles Creality Falcon2-40W Features: 🔝 Creality Falcon2 adopts 40W Laser Module which improve photoelectric conversion efficiency, beam quality, and reliability to a standard comparable to 20W products by adopting new package cooling technology. Able to cut 20mm wooden board or 30mm black acrylic plate by one pass. 🔝 Upgraded adjustable Laser beam - 0.1mm/0.15mm, which can be used to adjust the light beam according to the engraving and cutting needs, making the work more refined. And with 25000mm/min amazing engraving Speed, Falcon2 allows you to spend less time creating more.

🔝 Equipped with new Integrated air assist system, free to manually adjust the air assist steplessly through the knob, or it can automatically adjust the airflow through LightBurn, to remove smoke and protect the laser lens, bringing a cleaner result. 🔝 Up to 400mm*415mm work area, perfect for carving large wooden craft. The integrated sliding rail on the axis keeps the running highly synchronized, while the U-shaped wear-resistant wheels make motion more stable. This 40W lazer power Carving machine support insert TF card and offline creating; Free to dynamic preview and adjust precisely without connecting to a computer. 🔝 Falcon2 40W designed with more protection functions to keep users and machine safety when enjoy the creating.

Triple Monitoring Systems including Airflow Monitoring, Lens Monitoring and Flame Monitoring. And 5 safety protections - Bidirectional Limit Switch, Active Stop Function, Security Lock Design, Emergency Stop Button and Laser Protective Cover. 🔝 The full aluminum alloy structure design brings a more solid machine, ensuring exceptional stability even in high-speed operation. Only 3 steps are needed for full assembly. You can enjoy creating as soon as possible.

New design - there are 3 adjustment holes on the bottom of the machine to suit different table sizes. Specification: Model: Creality Falcon2 40W Laser Module Output Power: 40W Laser Spot: 0.1mm/0.15mm Wavelength: 455±5mm Engraving Speed: Max. 25000mm/min Working Area: 400mm*415mm Voltage Input: 100-240V~ 50-60Hz Voltage Output: DC 24.0V 10A Connecting Interfaces: TF Card, Type-C Operating System: Windows,MacOS Control Software: LightBurn,LaserGRBL File Type(s): jpeg,jpg,png,bmp,svg,dxf etc. Material for Engraving: Cardboard, Felt, Cardboard,Wood, Bamboo, Leather, Fabric, Acrylic, Brushed Stainless Steel, Dark Anodized Aluminum, Painted Metal, etc. Material for Cutting: Cardboard, Felt, Cardboard,Wood, Bamboo, Leather, Fabric, Acrylic, Brushed Stainless Steel etc.

Net Weight: 7.4kg Product Size: 664x570x193mm Package Size: 725x625x150mm/28.5x24.6x5.9in Package Weight: 10.94kg/24.1lb Packing List: 1 x Creality Falcon2 40W Laser Engraver