Atomstack P7 30W Engraver Desktop Diy Engraving Cutting Machine With A5S2

Features： Newly Upgraded Ultra-fine :the adopts 4-fold lens group collimation and technology, the optical is 4.5~5W, the area is reduced to 0.02mm², the high-density can easily cut 10mm thick wood boards and 6-8mm black acrylic ; Can directly engrave mirror stainless steel metal and ceramics. Upgraded Version of High-performance Fixed- :Engraving can be done without adjusting the focal length; the newly upgraded compressed increases the energy concentration by 200%, and the size is only 0.02mm², which can take into account both engraving and high-energy cutting. At the same , the of fixed- is more stable than that of zoom . Easy Installation:The all- alloy anodized structure design makes the machine more and improves the accuracy of engraving. The portable all-metal structure, 85% pre-assembly, can be installed in 5 minutes.

Eye- -retardant Filter Panoramic :The -retardant filter panoramic can filter 97% of the ultraviolet , which plays a very role in protecting your eyes. You and the people around you do not need to wear , you can also clearly Watch engraving. Reduce the cost of your and the inconvenience of wearing . The is and safer to use. More Humanized & Design:With knob for easier to adjust the height of the and a horizontal gyroscope auto stop working when it is tilted.

Wide Compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. Specifications: Model:ATOMSTACK P7 M30 Frame Material: alloy Input Voltage:AC100-240V, 50/60Hz Output Voltage:DC12V, 3A Engraving Size:Recommend Print Size 200*200mm Engraving Materials:wood, bamboo, cardboard, , leather, MDF, slate, lacquered metal, mirror stainless steel; Cutting Material:cardboard, non-woven fabric, veneer, acrylic, some thin board, sponge, MDF, leather; Size:0.02㎡ :30W Output :4.5-5W Length:445 ± 5nm Engraving Accuracy:0.01mm Focusing Method:fixed , no need to Protective Cover: the users eyes and pets from grabbing the . Operating Software:Compatible wiith LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Input Format:NC, BMP, JPG, PNG, DXF, etc. Data transmission Method:USB connection.

Machine Size:382*420*146mm/ 15*16.5*5.7n Machine Weight:3kg/ 6.6lb Package Size:490*275*135mm/ 19.2*10.8*0.5in Package Weight:4691g/10.3lb Note: When operating the engraving machine, please install the protective cover. If it is not installed, you need to wear . Please do not the emitter with your hand, or it may burn your hand. Please strong impact on the machine. Under 14 are not allowed to use this product and over 14 need supervision.

The engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the . Packing List: Assembly block*4 Module*1 Slide*1 Foot Pad Foam*4 USB Cable*1 Open *1 Y- Belt Assembly*1 Marker *1 Cable Tie*5 Screw*4 Hexagonal *2 Wood Chips*3 Fixed Film*1 Acrylic Sheet*3 Cutting Pad *1 Lower Support Foot*1 Upper Support Foot*1 Control Box*1 X Assembly*1 Y Assembly*1 *1 Cord*1