Atomstack S10 Pro Desktop Diy Engraving Cutting Machine F0Y7

Features: Eye design: The panoramic filter glass protective cover plays a very role in protecting your eyes, filtering 97% of the ultraviolet , you and the people around you can also watch engraving without wear . Reduce the cost of your and the inconvenience of wearing . Easy to install & solid structure: The all- alloy anodized structure design makes the machine more , and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes. Upgraded dual coupling technology: ultra-fine area is reduced to 0.08*0.06mm, high-density can easily cut 20mm wood, 15mm thick acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, and engraving & cutting speed is 40% higher than model, which can be comparable to the effect of the 150W ₂ engraving machine.

Upgraded fixed- : no need to adjust the before engraving;The focal area of the new is only 1/3 of the area of other ordinary lasers, new combine engraving and high energy cutting at the same . The of the fixed- is more stable than the zoom . Precise scale lines : There are precise scale lines on the X- and Y- to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs. Wide compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.

More function: uses an integrated screw rod which makes the movement of the more precise and the coupling more . Support offline engraving; In the event of an unexpected situation, stop the machine at any to make the engraving safer. The sintering is up to 1200℃ Specification: Model: ATOMSTACK S10 PRO Print Size: Recommend Print Size 410*400mm Carving Objects:Wood, bamboo, cardboard, , leather, board, oxide, non-reflective Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate; Cutting Objects:Cardboard, non-woven fabric, wood board, acrylic, some thin board, sponge; : 50W output : 10-11W Length: 445 ± 5nm Engraving accuracy: 0.01mm Focusing method: fixed , no need to protective cover: the users eyes and pets from grabbing the . Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Input Format: NC, BMP, JPG, PNG, DXF, etc.

Data transmission method: USB connection. Input Voltage: AC100-240V, 50/60Hz Output Voltage: DC12V, 3A Package Size: 59.5*35*13cm/ 23*13.8*5.1in Package Weight: 5.77kg/12.7lbs Note: ● When operating the engraving machine, please install the protective cover. If it is not installed, you need to wear . ● Please do not the emitter with your hand, or it may burn your hand. ● Please strong impact on the machine.

● under 14 are not allowed to use this product and over 14 need supervision. ● The engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the . Packing List: 1 x Tool Kit 4 x Foot Pad Foam 1 x Film 3 x Acrylic Sheet 3 x Wood Chips 10 x Wire Tie 1 x Desiccant 1 x Brush 1 x Cloth 1 x 1 x TF 1 x 1 x Instruction 1 x Data Line 1 x Screen 1 x High-Definition Interface Cable 1 x Module 1 x Cutting Pad 1 x X Assembly 1 x Y Left Profile 1 x Y Right Profile 1 x Profile On The Base 1 x Under The Base Profile 3 x Foot Bracket