LU2-10A 10W Engraving Module Ultra-Fine Compressed V9A7

Features: Widely Compatible Design: It can be installed on a variety of brand machines, such as master 2 pro , master 2 , master 3. 60W Effect Compressed : 24V LU2-10A with real 10W . It has an ultra-thin , and its cutting penetration and accuracy are twice of ordinary lasers. Even in the field of lasers, LU2-10A has finer engraving marks and cutting and penetration capabilities. It can cut 20mm thick wood boards and engrave ceramics and acrylics, which is almost beyond the effect of 60W CO2 .

Fixed- Design: Combines a fixed lens and a sliding design. You only need to slide the and tighten the screws to complete focusing. This makes the use of the very simple. Using it on different machines does not affect its sliding fixed focusing function. Circle Eye- Cover Design: The filter cover filters 98% of the ultraviolet to the eyes.

You and the people around you can watch engraving from all angles without wearing . At the same , it can animals from catching the . General 24V/PWM Modulation Board: It is the latest 24V/PWM modulation board, which can be adapted to common GRBL or motherboards. Specification: Class: Class 4 Optical : 9,500-10,500mW Electric : 40W Product Size: 44x55x121MM / 1.73"x2.17"x4.76" Net Weight: 235g / 0.52LBS Length: 445±5nm Lens Group: 3rd Lens Group : Fixed Size: About 0.05 x 0.1MM Diode: 5.5W Diodes x 2 Input Voltage of Diode: 8. Input Current of Diode: 3.8A Service : &;10,000 Hours (Every 50 hours of use, please check the lens, if its dirty, please the lens with a cotton and .) Control Board: 24V/PWM Control Board Control Mode: PWM Rate: S0-,000 Support Engraving Speed: 0-20,000MM/Min Air Assist: Built-in Materials: + Brass + PC Wires: 4P 22AWG Input Voltage of : - (Compatible) Output of : 24V / 2A Package Weight: 700g/24.6oz Package Size: 25x14x10cm/9.8x5.5x4in Packing List: 1 x Engraving Module