Sculpfun Icube Pro Max 10W Laser Engraver Engraving Machine For Wood Leather K5U

Features: ♦ 10W Powerful Cutting : The iCube Max uses 10W diode with 0.08mm . It has performance, cutting penetration and higher working efficiency, which can engrave or cut more difficult materials and complete the tasks faster. ♦ High- Engraving: iCube ProMax 10W engraver with the 32-bit motherboard greatly improves the engraving efficiency, which can reach 10000mm/min engraving . ♦ With Filter: Sculpfun iCube engraver is equipped with the filtration system that effectively filters the generated during the engraving and cutting process without the enclosure, which makes it more convenient to engrave and cut in an office or home. Bringing more usage scenarios and the fun of engraving without limitation.

♦ Multiple Connection Methods: The engraving machine supports and system connection. You can connect to iCube machine via your with Sculpfun APP, or you can connect to the with the function or Type-C interface data cable to use. It is compatible with Win7/Win8/Win10/Win11//IOS/Android/Linux system. ♦ Function: Built with the device, the machine will stop running and emit a when the inside the engraving machine is over 45℃ to ensure the safety of users and equipment. And when the descends, restart the machine to the work.

♦ Enclosed Eye conservation : iCube portable engraver is designed with a detachable fully enclosed Acrylic material eye conservation , which can effectively your eyes from different angles. It enables you to observe the engraving process without wearing the . ♦ Engraving Objects without Size Limit: With the semi-open structure design, there is no limitation by the size of the engraving objects. You can place them inside the machine or put the machine on the surface of some large objects to perform the tasks. The pattern's engraving area is 120x120mm which can meet your various engraving demands.

♦ Replaceable Lens: Sculpfun iCube series adopts an innovative head that supports to replace the lens, which greatly improves the service of the by more than 10 times longer than that of other general lasers. When the lens is damaged or dirtied after long-term use, it can be replaced to restore the cutting . Specification: Product Model: Sculpfun iCube ProMax 10W Fan : 5000RPM : 45℃ Trigger : 4.2 : Wavelength: 455nm Engraving Area: 120x120mm Head : 10W Format: JPEG/BMP/TIF/GIF etc. : 0.08mm Working Voltage: 110-240V AC, 50/60Hz Working Current: 7A Optimal Focusing Distance: 40mm Support System: Win7/Win8/Win10/Win11//IOS/Android/Linux Operation Application Software: : LightBurn/LaserGRBL : Sculpfun APP Product Weight: 3.2KG Product Size(LWH): 262*300*226mm Package Weight: 4.75KG/10.4lb Package Size: 318x282x360mm/12..1x14.1in Some Important Tips: 1: About the Engraving Materials: Note that any specular reflective objects can not be engraved, otherwise the reflection will damage the head. 2: About the filter: A free set of cotton filter is attached with purchasing, it needs to be replaced periodically to ensure the filter effect.

3: About the lens: A free lens is attached in the package with purchasing, which also can be ordered separately. Packing List: 1 x Engraver 1 x U-Shaped 1 Plate 1 x Head 1 x 1 x Cable 1 x Type-C Data Cable 1 x Cotton Filter Set 1 x Lens Kit 1 x 1 x Basswood Board 1 x MDF 1 x Installation Instruction Precautions: ●Because of the powerful , it is forbidden to run the engraving machine unattended. Please pause it if you're not around. ●Please refer to the user manual for detailed machine instructions and parameter settings. ●Please install the protective cover before operating the machine; if not, a pair of is needed.

●Do not the with your hands, or it may burn your hands. ●Please strong impact on the machine. ● under 14 are not allowed to use this product and over 14 need supervision. ●Do not apply the directly to any specular reflective objects as this may cause injury to the operator or burn the .