Sculpfun S10 Laser Engraving Machine High-Density 10W Engraver Air Assist J1M5

Features: 10W laser Beam Shaping Technology: The S10 laser output power is increased to 10W, which is twice that of the S9. But S10 obtains the same ultra-thin laser beam with 0.08mm focus as S9, which means S10 has higher energy density, stronger cutting penetration and engraving capabilities. Powerful High-speed Air Assist: Equipped with a high-speed air assist nozzle. Advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor, the S10 spray airflow faster.

For example, when using 30L/min, 0.03Mpa air compressor, the S10 nozzle will spray high-speed airflow up to 14.5m/s. This will greatly improve the cutting penetration and cutting efficiency. Industrial-grade Cutting Accuracy: S10 adopts industrial high-precision linear slide rail X-axis, which makes it get industrial-grade engraving accuracy. When comparing the small engraving details, S10 does not have the wave lines that other ordinary engraving machines appear. More Advanced and Upgradable 32-bit Motherboard: The S10 motherboard uses 32-bit chips, with faster computing speed, and it still reserves Z-axis and limit switch functions to facilitate people to upgrade the engraving machine.

It still perfectly supports laser cutting software like Lightburn and LaserGRBL. Square Measuring Ruler: X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 400x400mm large-area engraving interval can meet your various engraving needs. Detachable Laser Shield & Safe Design: Equipped with a detachable eye shield, which will not dazzle even without glasses. And if you dont need it, you can easily disassemble the eye shield.

There is a very safe and eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency. The all-metal body makes the machine very sturdy and durable. And the free A4 size steel pad can protect the table from laser damage, isolate fire hazards. Specification: Model: S10 Diode Laser Output Power: 10W (Note This Is Light Energy Not Electrical Energy) Inner Diameter Of Air Pipe: 7.5mm (Recommended To Use 30L/Min, 0.03mpa Air Compressor, Out Diameter Of Nozzle: 8mm) Laser Wavelength: 455±5nm Engraving Accuracy: 0.01mm Engraving Area Size: 410x400mm Focusing Method: Fixed Focus + Sliding Device Laser Protection Cover: Equipped With a Detachable Laser Cover To Protect The Eyes. You Can Adjust It Up And Down, Or Remove The Cover Machine Power Consumption: About 36W (Not Related To Engraving Or Cutting Performance, Just Power Consumption) Engraving/Cutting Materials: Engraving Material: All Kinds Of Wood (Including Walnut, Cherry And Other High Density Wood), MDF, Bamboo, Cardboard, Plastic, Leather, PCB Board, Alumina, 304 Stainless Steel, Ceramic, Dark Stone Cutting Material: All Kinds Of Wood (Including Walnut, Cherry And Other High-Density Wood), MDF, Acrylic, Cardboard, Bamboo, Some Plastic Boards, Leather, PCB Boards Laser Software: LASERGRBL, LIGHTBURN, LASERGRBL, LIGHTBURN, BENBOX, GRBLCONTROLLER, LITEFIRE Support System: Support MAC, Windows System Supported File Formats: NC, BMP, JPG, PNG, DXF And Other Image Formats Data Transfer Method: USB Connection Power Input: 100-240V AC, 50/60hz; Output: 12V 5A Product Weight: 3.42kg Packing Weight: 5.13kg/11.3lb Packing Size: 600 x 345 x 130mm/23.6 x 13.6 x 5.1in Notes: ●Because of the powerful laser of S10, it is forbidden to run the engraving machine unattended.

Pause it if youre not around. ●For detailed machine instructions, please refer to the manual for parameter settings. ●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles. ●Do not touch the laser with your hands, otherwise you may burn your hands. ●Please avoid strong impact on the machine.

●It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended. ●Do not use the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser. Packing List: 1 x X-Axis Assembly 2 x X Profiles 2 x Y Profiles 1 x Control Box Assembly 3 x Support Feet 1 x S10 Laser 1 x 12V 5A Power Adapter 1 x Power Cord 1 x USB Cable 1 x Air Tube 3 x Tool Bag 1 x Laser Goggles 1 x Test Wood Board 1 x A4 Size Metal Pad Step 1-6 Install The Package 1 x User Manual Hello buyer! Welcome to our store! Shopping here with great experience, looking forward for your feedback!