Laser Power Supply 60W 110V Psu For Co2 Laser Engraver Laser Power Supplies

Product Description Product Description: --> Features & Details 【HIGH EFFICIENCY】- This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response. 【SIMPLE PORT CONTROL】- Suitable for high and low-level signals. Use the TTL level to control the laser start and stop. At the same time, a protection switch is added to detect whether there is water or ventilation outside. 【LASER POWER ADJUSTMENT】- The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals.

【OPEN CIRCUIT PROTECTION】- The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube. 【FACTORY AGING TEST】- Each power supply will be subjected to a high temperature 60 ° C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds. Key Features High Performance Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube. Easy Control The laser power supply machine starts and stop can be easily controlled by the TTL level. Simple Laser Power Control Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal.

Mark Clearly Each data is marked for your convenience. Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken. Protection Function Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser; It can better protect the laser power and prolong the service life.

Good Compatibility Co2 laser engraver power supply is suitable for a variety of CO2 laser tubes. Laser Power Supply The CO2 laser power supply is small in size, light in weight, easy to operate, and has a good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube. High Efficiency Simple Port Control: Laser Power Adjustment Open Circuit Protection Package Content--> Specification: Power: 60W Input Voltage: AC110V Maximum Output Voltage: 24KV Maximum Output Current: 25mA Efficiency: 91% Response Speed: ≤1ms Cooling Method: Fan Cooling Gross Weight:2.3kg/5.09lbs Package Size: 27x20x14cm/10.62x7.87x5.51inch Package Content: 1 x High Voltage Pack (Including a High Voltage Head and a High Voltage Wire) 1 x Laser Power Supply (60W) --> MYJG40W --> MYJG40W MYJG50W --> MYJG50W MYJG80W --> MYJG80W MYJG100W --> MYJG100W MYJG130W --> MYJG130W MYJG150W --> MYJG150W Input voltage --> Input voltage AC110V --> AC110V AC110V --> AC110V AC110V --> AC110V AC110V --> AC110V AC110V --> AC110V AC110V --> AC110V Output voltage --> Output voltage DC23KV --> DC23KV DC22KV --> DC22KV DC26KV --> DC26KV DC28KV --> DC28KV DC50KV --> DC50KV DC34KV --> DC34KV Max output current --> Max output current 20mA --> 20mA 22mA --> 22mA 28mA --> 28mA 30mA --> 30mA 35mA --> 35mA 38mA --> 38mA Response speed --> Response speed ≤1mS --> ≤1mS ≤1mS --> ≤1mS ≤1mS --> ≤1mS ≤1mS --> ≤1mS ≤1mS --> ≤1mS ≤1mS --> ≤1mS Size --> Size 165mm*142mm*78mm --> 165mm*142mm*78mm 165mm*142mm*78mm --> 165mm*142mm*78mm 197mm*161mm*91mm --> 197mm*161mm*91mm 230mm*161mm*96mm --> 230mm*161mm*96mm 305mm*161mm*96mm --> 305mm*161mm*96mm 305mm*161mm*96mm --> 305mm*161mm*96mm Cooling mode --> Cooling mode Fan Cooling --> Fan Cooling Fan Cooling --> Fan Cooling Fan Cooling --> Fan Cooling Fan Cooling --> Fan Cooling Fan Cooling --> Fan Cooling Fan Cooling --> Fan Cooling Efficiency --> Efficiency 90.00% --> 90.00% 91.00% --> 91.00% 91.00% --> 91.00% 91.00% --> 91.00% 91.00% --> 91.00% 91.00% --> 91.00% SHIPPING ABOUT US PAYMENT RETURNS CONTACT WARRANTY Welcome to our classifieds board store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years.

We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. We accept PayPal payment,PayPal Credit,Credit card or debit card and so on. Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.

We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution. DELIVERY DAYS: 3-7 BUSINESS DAYS 3 BUSINESS DAYS SHIPPING OUT SHIP FROM CA & TX & NJ & GA & NC &OR WAREHOUSE California Warehouse: City of Industry, CA Texas Warehouse: Houston, TX New Jersey Warehouse: Perth Amboy, NJ New York State Warehouse: Perth Amboy, NJ Georgia Warehouse: Austell,GA North Carolina Warehouse: Grove NC Oregon Warehouse: AIRPORT WAY Portland,OR All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping.

In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. We ONLY accept returns with original package.

Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. Email Customer Support: 9:00am-2:00am PST Sunday-Friday All emails will be responded to within 12-24 hours This item comes with 12 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. Replacement products are provided with the same warranty as the returned products. Laser Power Supply The CO2 laser power supply is small in size, light in weight, easy to operate, and has a good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube. High Efficiency Simple Port Control: Laser Power Adjustment Open Circuit Protection Key Features High Performance Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube.

Easy Control The laser power supply machine starts and stop can be easily controlled by the TTL level. Simple Laser Power Control Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal. Mark Clearly Each data is marked for your convenience.Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken.

Protection Function Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser; It can better protect the laser power and prolong the service life. Good Compatibility Co2 laser engraver power supply is suitable for a variety of CO2 laser tubes. Package Content: 1 x High Voltage Pack (Including a High Voltage Head and a High Voltage Wire) 1 x Laser Power Supply (60W) Specification: Power: 60W Input Voltage: AC110V Maximum Output Voltage: 24KV Maximum Output Current: 25mA Efficiency: 91% Response Speed: ≤1ms Cooling Method: Fan Cooling Gross Weight:2.3kg/5.09lbs Package Size: 27x20x14cm/10.62x7.87x5.51inch MYJG40W MYJG50W MYJG80W MYJG100W MYJG130W MYJG150W Input voltage AC110V AC110V AC110V AC110V AC110V AC110V Output voltage DC23KV DC22KV DC26KV DC28KV DC50KV DC34KV Max output current 20mA 22mA 28mA 30mA 35mA 38mA Response speed ≤1mS ≤1mS ≤1mS ≤1mS ≤1mS ≤1mS Size 165mm*142mm*78mm 165mm*142mm*78mm 197mm*161mm*91mm 230mm*161mm*96mm 305mm*161mm*96mm 305mm*161mm*96mm Cooling mode Fan Cooling Fan Cooling Fan Cooling Fan Cooling Fan Cooling Fan Cooling Efficiency 90.00% 91.00% 91.00% 91.00% 91.00% 91.00% Features & Details 【HIGH EFFICIENCY】- This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response. 【SIMPLE PORT CONTROL】- Suitable for high and low-level signals. Use the TTL level to control the laser start and stop.

At the same time, a protection switch is added to detect whether there is water or ventilation outside. 【LASER POWER ADJUSTMENT】- The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals. 【OPEN CIRCUIT PROTECTION】- The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube. 【FACTORY AGING TEST】- Each power supply will be subjected to a high temperature 60 ° C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds. SHIPPING DELIVERY DAYS: 3-7 BUSINESS DAYS 3 BUSINESS DAYS SHIPPING OUT SHIP FROM CA & TX & NJ & GA & NC &OR WAREHOUSE California Warehouse: City of Industry, CA Texas Warehouse: Houston, TX New Jersey Warehouse: Perth Amboy, NJ New York State Warehouse: Perth Amboy, NJ Georgia Warehouse: Austell,GA North Carolina Warehouse: Grove NC Oregon Warehouse: AIRPORT WAY Portland,OR ABOUT US Welcome to our classifieds board store.

As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. PAYMENT We accept PayPal payment,PayPal Credit,Credit card or debit card and so on. Payment should be completed within 4 (Four) days of auction closing.

Or unpaid dispute will be filed for closing auction. We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution. RETURNS All of our items are backed with a 30-day return policy.

We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. CONTACT Email Customer Support: 9:00am-2:00am PST Sunday-Friday All emails will be responded to within 12-24 hours WARRANTY This item comes with 12 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.

If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. Replacement products are provided with the same warranty as the returned products. On Dec-14-21 at 21:26:12 PST, seller added the following information: