Vevor Switch Laser Power Supply 50W For CO2 Laser Tube Engraving Cutting Machine

Product Description Product Description: --> Features & Details 【HIGH EFFICIENCY】- This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response. 【SIMPLE PORT CONTROL】- Suitable for high and low-level signals. Use the TTL level to control the laser start and stop. At the same time, a protection switch is added to detect whether there is water or ventilation outside. 【LASER POWER ADJUSTMENT】- The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals.

【OPEN CIRCUIT PROTECTION】- The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube. 【FACTORY AGING TEST】- Each power supply will be subjected to a high temperature 60 ° C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds. Key Features High Performance Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube. Easy Control The laser power supply machine starts and stop can be easily controlled by the TTL level. Simple Laser Power Control Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal.

Mark Clearly Each data is marked for your convenience. Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken. Protection Function Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser; It can better protect the laser power and prolong the service life.

Good Compatibility Co2 laser engraver power supply is suitable for a variety of CO2 laser tubes. Laser Power Supply The CO2 laser power supply is small in size, light in weight, easy to operate, and has a good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube. High Efficiency Simple Port Control: Laser Power Adjustment Open Circuit Protection Package Content--> Specification: Power: 50W Input Voltage: AC110V / AC220V Maximum Output Voltage: 22KV Maximum Output Current: 22mA Efficiency: 91% Response Speed: ≤1ms Cooling Method: Fan Cooling Gross Weight: 1.2kg/2.64lbs Package Size: 23x23x13cm/9x9x5.11inch Package Content: 1 x 80cm Cable 1 x Laser Power Supply (50W) --> laser tube-50W --> laser tube-50W laser tube-60W --> laser tube-60W laser tube-80W --> laser tube-80W laser tube-100W --> laser tube-100W laser tube-130W --> laser tube-130W laser tube-150W --> laser tube-150W Power Output --> Power Output 50W --> 50W 60W --> 60W 80W --> 80W 100W --> 100W 130W --> 130W 150W --> 150W Trigger Voltage --> Trigger Voltage 24KV --> 24KV 24KV --> 24KV 26KV --> 26KV 26KV --> 26KV 40KV --> 40KV 30KV --> 30KV Working Voltage --> Working Voltage 16KV --> 16KV 18KV --> 18KV 18KV --> 18KV 20KV --> 20KV 28KV --> 28KV 25KV --> 25KV Optimal Operating Current --> Optimal Operating Current 22mA --> 22mA 15-18mA --> 15-18mA 7-30mA --> 7-30mA 7-40mA --> 7-40mA 30mA --> 30mA 35mA --> 35mA Outer Diameter --> Outer Diameter 50-55 mm --> 50-55 mm 55 mm --> 55 mm 80 mm --> 80 mm 80 mm --> 80 mm 80 mm --> 80 mm 80 mm --> 80 mm Beam Diameter --> Beam Diameter 4.8 mm --> 4.8 mm 2.5 mm --> 2.5 mm 2.5 mm --> 2.5 mm 2.5 mm --> 2.5 mm 2.5 mm --> 2.5 mm 2.5 mm --> 2.5 mm Length --> Length 800 mm --> 800 mm 1000 mm --> 1000 mm 1230 mm --> 1230 mm 1430 mm --> 1430 mm 1630 mm --> 1630 mm 1830 mm --> 1830 mm Wavelength --> Wavelength 10.6 microns --> 10.6 microns 10.6 microns --> 10.6 microns 10.6 microns --> 10.6 microns 10.6 microns --> 10.6 microns 10.6 microns --> 10.6 microns 10.6 microns --> 10.6 microns Gross Weight --> Gross Weight 7.08 kg (15.61 lbs) --> 7.08 kg (15.61 lbs) 14.5 kg (31.961 lbs) --> 14.5 kg (31.961 lbs) 16.46 kg (36.281 lbs) --> 16.46 kg (36.281 lbs) 18.67 kg (41.161 lbs) --> 18.67 kg (41.161 lbs) 18.67 kg (41.161 lbs) --> 18.67 kg (41.161 lbs) 12.84 kg (28.31 lbs) --> 12.84 kg (28.31 lbs) --> Laser Power Supply-40W --> Laser Power Supply-40W Laser Power Supply-50W --> Laser Power Supply-50W Laser Power Supply-60W --> Laser Power Supply-60W Laser Power Supply-80W --> Laser Power Supply-80W Laser Power Supply-100W --> Laser Power Supply-100W Power --> Power 40W --> 40W 50W --> 50W 60W --> 60W 80W --> 80W 100W --> 100W Input Voltage --> Input Voltage AC110V / AC220V --> AC110V / AC220V AC110V / AC220V --> AC110V / AC220V AC110V / AC220V --> AC110V / AC220V AC110V / AC220V --> AC110V / AC220V AC110V / AC220V --> AC110V / AC220V Maximum Output Voltage --> Maximum Output Voltage 23KV --> 23KV 22KV --> 22KV 24KV --> 24KV 26KV --> 26KV 28KV --> 28KV Maximum Output Current --> Maximum Output Current 20mA --> 20mA 22mA --> 22mA 25mA --> 25mA 28mA --> 28mA 30mA --> 30mA Response Speed --> Response Speed ≤1ms --> ≤1ms ≤1ms --> ≤1ms ≤1ms --> ≤1ms ≤1ms --> ≤1ms ≤1ms --> ≤1ms Cooling Method --> Cooling Method Fan Cooling --> Fan Cooling Fan Cooling --> Fan Cooling Fan Cooling --> Fan Cooling Fan Cooling --> Fan Cooling Fan Cooling --> Fan Cooling Gross Weight --> Gross Weight 1.2kg/2.64lbs --> 1.2kg/2.64lbs 1.2kg/2.64lbs --> 1.2kg/2.64lbs 2.3kg/5.09lbs --> 2.3kg/5.09lbs 2.3kg/5.11lbs --> 2.3kg/5.11lbs 3kg/6.61lbs --> 3kg/6.61lbs SHIPPING ABOUT US PAYMENT RETURNS CONTACT WARRANTY Welcome to our classifieds board store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years.

We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. We accept PayPal Payment,PayPal Credit,Credit card or debit card and so on. Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.

We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution. Ship from UK and only to classifieds board ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out.

Once your payment is completed, pls inform us by phone or leave a classifieds board note if the changes are needed before we send the product. If you have any changes, pls inform us 7:00am-13:00pm (Berlin Time) in the same day. Please be aware that we can't ship the item to the follow addresses：POBOX/Packstation /Postfiliale /Paketshop. If an change of address is needed, you will be responsible for any fees associated in the condition that you contact us after we ship your item. International Buyers – Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.

These charges are the buyer’s responsibility. Orders placed on weekend will be shipped within 2 days. DHL/DPD: 2-4 business days. All of our items are backed with a 60-day return policy. We ensure all our items are new and in excellent condition prior to shipping.

In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. We ONLY accept returns with original package.

Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. Email Customer Support: 9:00am-2:00am PST Sunday-Friday All emails will be responded to within 12-24hours This item comes with 12 months Manufacturer's Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. Replacement products are provided with the same warranty as the returned products. Laser Power Supply The CO2 laser power supply is small in size, light in weight, easy to operate, and has a good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube. High Efficiency Simple Port Control: Laser Power Adjustment Open Circuit Protection Key Features High Performance Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube.

Easy Control The laser power supply machine starts and stop can be easily controlled by the TTL level. Simple Laser Power Control Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal. Mark Clearly Each data is marked for your convenience.Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken.

Protection Function Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser; It can better protect the laser power and prolong the service life. Good Compatibility Co2 laser engraver power supply is suitable for a variety of CO2 laser tubes. Package Content: 1 x 80cm Cable 1 x Laser Power Supply (50W) Specification: Power: 50W Input Voltage: AC110V / AC220V Maximum Output Voltage: 22KV Maximum Output Current: 22mA Efficiency: 91% Response Speed: ≤1ms Cooling Method: Fan Cooling Gross Weight: 1.2kg/2.64lbs Package Size: 23x23x13cm/9x9x5.11inch laser tube-50W laser tube-60W laser tube-80W laser tube-100W laser tube-130W laser tube-150W Power Output 50W 60W 80W 100W 130W 150W Trigger Voltage 24KV 24KV 26KV 26KV 40KV 30KV Working Voltage 16KV 18KV 18KV 20KV 28KV 25KV Optimal Operating Current 22mA 15-18mA 7-30mA 7-40mA 30mA 35mA Outer Diameter 50-55 mm 55 mm 80 mm 80 mm 80 mm 80 mm Beam Diameter 4.8 mm 2.5 mm 2.5 mm 2.5 mm 2.5 mm 2.5 mm Length 800 mm 1000 mm 1230 mm 1430 mm 1630 mm 1830 mm Wavelength 10.6 microns 10.6 microns 10.6 microns 10.6 microns 10.6 microns 10.6 microns Gross Weight 7.08 kg (15.61 lbs) 14.5 kg (31.961 lbs) 16.46 kg (36.281 lbs) 18.67 kg (41.161 lbs) 18.67 kg (41.161 lbs) 12.84 kg (28.31 lbs) Laser Power Supply-40W Laser Power Supply-50W Laser Power Supply-60W Laser Power Supply-80W Laser Power Supply-100W Power 40W 50W 60W 80W 100W Input Voltage AC110V / AC220V AC110V / AC220V AC110V / AC220V AC110V / AC220V AC110V / AC220V Maximum Output Voltage 23KV 22KV 24KV 26KV 28KV Maximum Output Current 20mA 22mA 25mA 28mA 30mA Response Speed ≤1ms ≤1ms ≤1ms ≤1ms ≤1ms Cooling Method Fan Cooling Fan Cooling Fan Cooling Fan Cooling Fan Cooling Gross Weight 1.2kg/2.64lbs 1.2kg/2.64lbs 2.3kg/5.09lbs 2.3kg/5.11lbs 3kg/6.61lbs Features & Details 【HIGH EFFICIENCY】- This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response. 【SIMPLE PORT CONTROL】- Suitable for high and low-level signals. Use the TTL level to control the laser start and stop.

At the same time, a protection switch is added to detect whether there is water or ventilation outside. 【LASER POWER ADJUSTMENT】- The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals. 【OPEN CIRCUIT PROTECTION】- The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube. 【FACTORY AGING TEST】- Each power supply will be subjected to a high temperature 60 ° C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds. SHIPPING Ship from UK and only to classifieds board ADDRESS.

Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by phone or leave a classifieds board note if the changes are needed before we send the product. If you have any changes, pls inform us 7:00am-13:00pm (Berlin Time) in the same day. ABOUT US Welcome to our classifieds board store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years.

We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. PAYMENT We accept PayPal Payment,PayPal Credit,Credit card or debit card and so on. Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.

We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution. RETURNS All of our items are backed with a 60-day return policy. We ensure all our items are new and in excellent condition prior to shipping.

In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. We ONLY accept returns with original package.

Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. CONTACT Email Customer Support: 9:00am-2:00am PST Sunday-Friday All emails will be responded to within 12-24hours WARRANTY This item comes with 12 months Manufacturer's Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. Replacement products are provided with the same warranty as the returned products.